What’s the main use of a ball valve?

Quick shutoff and flow control.

Is a ball valve full port or reduced port?

It can be either, depending on the design.

Can ball valves be used for gas?

Yes, if the material and rating are appropriate.

Do ball valves leak easily?

No, they offer tight sealing when properly maintained.

Are ball valves easy to automate?

Yes, they support pneumatic and electric actuators.

Injap Bola

3-Piece Trunnion Ball Valve 8″-150LB

Valve Type Three-Piece Trunnion Mounted Ball Valve
Body Type Three-Piece Bolted Body (Split Body)
Ball Support Trunnion Mounted (Fixed Ball)
End Connection Flanged, Raised Face (RF)
Nominal Size NPS 8 (DN200)
Pressure Class Class 150
Body Material A105 (Carbon Steel)
Service Medium Water / Oil / Gas / General Purpose
Operation Gearbox with Handwheel (Std.) / Actuator ready

Lihat butiran
Three-Piece Trunnion Mounted Ball Valve 8″-150LB

Valve Type Three-Piece Trunnion Mounted Ball Valve
Body Type Three-Piece Bolted Body (Split Body)
Ball Support Trunnion Mounted (Fixed Ball)
End Connection Flanged, Raised Face (RF)
Nominal Size NPS 8 (DN200)
Pressure Class Class 150
Body Material A105 (Carbon Steel)
Service Medium Water / Oil / Gas / General Purpose
Operation Gearbox with Handwheel (Std.) / Actuator ready

Lihat butiran
B62 Bronze Ball Valves

Valve Type Floating Ball Valve
Body Type 2-Piece Bolted Body
Nominal Size 3/4 inch (DN20)
Pressure Rating Class 1500 (ASME B16.34)
Connection Type NPT Female Thread (ASME B1.20.1)
Body Material ASTM B62 (C83600, Tin Bronze / 85-5-5-5)
Seat Material PEEK (Polyether Ether Ketone)
Applicable Media Water, Oil, Gas, and some corrosive media (verify chemical compatibility with PEEK)
Temperature Range -40°C ~ +260°C (Typical for PEEK; dependent on pressure)

Lihat butiran
PFA Fully Lined Floating Ball Valve

Design & Manufacture GB/T 12237, API 608
Face-to-Face Dimension GB/T 12221, ASME B16.10
Flange Dimension GB/T 9113, HG/T 20592, ASME B16.5
Pressure Testing GB/T 13927, API 598, JB/T 9092
Lining Process Standard HG/T 3704

Lihat butiran
Plumbing Ball Valve Threaded

Valve Type 2-Piece Floating Ball Valve
Body Material 59-1 Brass (CuZn40Pb2 • GB/T 5231) • Dezincification Resistant
Ball Material Chrome-Plated Brass (Surface Ra ≤0.8 μm)
Seat Material Reinforced PTFE (Standard) • Optional: RPTFE + 15% Glass Fiber
Stem Material Forged 59-1 Brass • Anti-Blowout Design
Seals EPDM O-Rings (Standard) • Optional: VITON®/PTFE

Lihat butiran
Spring Closed Lever Operated Ball Valve

Valve Type Floating Ball Valve with Spring Return (Fail Close)
Nominal Diameter (DN) 1/2″ ~ 4″ (DN15 ~ DN100)
Nominal Pressure (Class) Class 150 LB
Connection Type Flanged / Threaded / Socket Weld (as required)
Operation Type Manual Lever Handle with Spring Return (Fail Close)

Lihat butiran
30″-600LB 3-Piece Trunnion Mounted Ball Valve

Valve Type 3-Piece Trunnion Ball Valve
Nominal Bore 30 inches (DN750)
Pressure Class 600 LB (Class 600)
Connection Type Flanged Ends (RF)
Operation Type Worm Gear Operator
Design Standard API 6D / ASME B16.34

Lihat butiran
20″-150LB 3-Piece Trunnion Mounted Ball Valve

Valve Type 3-Piece Trunnion Ball Valve
Nominal Bore 20 inches (DN500)
Pressure Class 150 LB (Class 150)
Connection Type Flanged Ends (RF)
Operation Type Worm Gear Operator
Design Standard API 6D / ASME B16.34
Face-to-Face ASME B16.10
Flange Standard ASME B16.5
Inspection & Test API 598

Lihat butiran
16″-600LB 3-Piece Trunnion Mounted Ball Valves

Body Construction Cast three-piece bolted body (left body + center body + right body)
Design Standard API 6D, API 608, ASME B16.34, ISO 14313, ISO 17292
Face-to-Face Dimension ASME B16.10, API 6D

Lihat butiran
2-Piece Closed Die Forged Steel Floating Ball Valve

Valve Type Floating Ball Valve
Body Type 2-Piece Split Body Construction
Manufacturing Process Die Forging
Design Standard API 608 / ASME B16.34 / BS 5351
Nominal Size 1/2″ ~ 2″ (DN15 ~ DN50)
Pressure Class Class 150 ~ 2500 LB (PN16 ~ PN420)
Connection Type Flanged (RF/RTJ) / Socket Weld (SW) / Butt Weld (BW) / Threaded (NPT)
Operation Lever Handle / Gear Operator / Pneumatic Actuator

Lihat butiran
DN80-PN40-RF Soft Seated Floating Ball Valve

Nominal Size DN80
Pressure Rating PN40 (4.0 MPa / 40 bar)
End Connection Flanged, Raised Face (RF) — EN 1092 1 / ASME B16.5 or equivalent
Body Construction Floating ball, two piece or three piece design
Temperature Range –29°C ~ +150°C (depending on seat material)
Applicable Media Water, oil, gas, mild corrosive fluids, etc.
Flange Standard EN 1092 1 PN40 / ASME B16.5 Class 300 (customer specified)
Face to Face EN 558 Series 1 / ASME B16.10

Lihat butiran
1″-800LB Vacuum Floating Ball Valve

Size 1 inch (DN25)
Pressure Class Class 800 LB (PN130 / 2000 PSI)
Body Material Stainless Steel (ASTM A182 F304 / F316 / F316L)
Manufacturing Process Forged Steel (Close Die Forged)
Design Standard ASME B16.34 / API 608 / API 6D
End Connection Standard ASME B1.20.1 (NPT) / ASME B16.25 (BW) / ASME B16.11 (SW)
Face to Face Standard Manufacturer Standard

Lihat butiran

Injap bola ialah sejenis injap suku pusingan yang mengawal aliran menggunakan bola berongga, berlubang dan berputar di dalam badan injap. Apabila lubang bola dijajarkan dengan saluran paip, bendalir mengalir dengan bebas; apabila diputar 90 darjah, aliran itu disekat sepenuhnya. Mekanisme mudah ini menjadikan injap bola sangat boleh dipercayai untuk aplikasi penutup dan kawalan. Injap bola terkenal dengan prestasi pengedap yang ketat, ketahanan dan kemudahan operasi. Mereka boleh mengendalikan keadaan tekanan dan suhu tinggi, dan sesuai untuk gas, cecair, atau media menghakis, bergantung pada bahan yang digunakan. Dengan penurunan tekanan minimum dan kawalan on-off yang cepat, injap bebola digunakan secara meluas dalam industri seperti minyak dan gas, rawatan air, pemprosesan kimia dan paip am. Ia datang dalam pelbagai jenis seperti dua hala, tiga hala, terapung, dan dipasang pada trunnion, dan boleh dikendalikan secara manual, pneumatik atau elektrik.