Valvole a sfera

3-Piece Trunnion Ball Valve 8″-150LB

Valve Type Three-Piece Trunnion Mounted Ball Valve
Body Type Three-Piece Bolted Body (Split Body)
Ball Support Trunnion Mounted (Fixed Ball)
End Connection Flanged, Raised Face (RF)
Nominal Size NPS 8 (DN200)
Pressure Class Class 150
Body Material A105 (Carbon Steel)
Service Medium Water / Oil / Gas / General Purpose
Operation Gearbox with Handwheel (Std.) / Actuator ready

Visualizza i dettagli
Three-Piece Trunnion Mounted Ball Valve 8″-150LB

Valve Type Three-Piece Trunnion Mounted Ball Valve
Body Type Three-Piece Bolted Body (Split Body)
Ball Support Trunnion Mounted (Fixed Ball)
End Connection Flanged, Raised Face (RF)
Nominal Size NPS 8 (DN200)
Pressure Class Class 150
Body Material A105 (Carbon Steel)
Service Medium Water / Oil / Gas / General Purpose
Operation Gearbox with Handwheel (Std.) / Actuator ready

Visualizza i dettagli
B62 Bronze Ball Valves

Valve Type Floating Ball Valve
Body Type 2-Piece Bolted Body
Nominal Size 3/4 inch (DN20)
Pressure Rating Class 1500 (ASME B16.34)
Connection Type NPT Female Thread (ASME B1.20.1)
Body Material ASTM B62 (C83600, Tin Bronze / 85-5-5-5)
Seat Material PEEK (Polyether Ether Ketone)
Applicable Media Water, Oil, Gas, and some corrosive media (verify chemical compatibility with PEEK)
Temperature Range -40°C ~ +260°C (Typical for PEEK; dependent on pressure)

Visualizza i dettagli
PFA Fully Lined Floating Ball Valve

Design & Manufacture GB/T 12237, API 608
Face-to-Face Dimension GB/T 12221, ASME B16.10
Flange Dimension GB/T 9113, HG/T 20592, ASME B16.5
Pressure Testing GB/T 13927, API 598, JB/T 9092
Lining Process Standard HG/T 3704

Visualizza i dettagli
Plumbing Ball Valve Threaded

Valve Type 2-Piece Floating Ball Valve
Body Material 59-1 Brass (CuZn40Pb2 • GB/T 5231) • Dezincification Resistant
Ball Material Chrome-Plated Brass (Surface Ra ≤0.8 μm)
Seat Material Reinforced PTFE (Standard) • Optional: RPTFE + 15% Glass Fiber
Stem Material Forged 59-1 Brass • Anti-Blowout Design
Seals EPDM O-Rings (Standard) • Optional: VITON®/PTFE

Visualizza i dettagli
Spring Closed Lever Operated Ball Valve

Valve Type Floating Ball Valve with Spring Return (Fail Close)
Nominal Diameter (DN) 1/2″ ~ 4″ (DN15 ~ DN100)
Nominal Pressure (Class) Class 150 LB
Connection Type Flanged / Threaded / Socket Weld (as required)
Operation Type Manual Lever Handle with Spring Return (Fail Close)

Visualizza i dettagli
30″-600LB 3-Piece Trunnion Mounted Ball Valve

Valve Type 3-Piece Trunnion Ball Valve
Nominal Bore 30 inches (DN750)
Pressure Class 600 LB (Class 600)
Connection Type Flanged Ends (RF)
Operation Type Worm Gear Operator
Design Standard API 6D / ASME B16.34

Visualizza i dettagli
20″-150LB 3-Piece Trunnion Mounted Ball Valve

Valve Type 3-Piece Trunnion Ball Valve
Nominal Bore 20 inches (DN500)
Pressure Class 150 LB (Class 150)
Connection Type Flanged Ends (RF)
Operation Type Worm Gear Operator
Design Standard API 6D / ASME B16.34
Face-to-Face ASME B16.10
Flange Standard ASME B16.5
Inspection & Test API 598

Visualizza i dettagli
16″-600LB 3-Piece Trunnion Mounted Ball Valves

Body Construction Cast three-piece bolted body (left body + center body + right body)
Design Standard API 6D, API 608, ASME B16.34, ISO 14313, ISO 17292
Face-to-Face Dimension ASME B16.10, API 6D

Visualizza i dettagli
2-Piece Closed Die Forged Steel Floating Ball Valve

Valve Type Floating Ball Valve
Body Type 2-Piece Split Body Construction
Manufacturing Process Die Forging
Design Standard API 608 / ASME B16.34 / BS 5351
Nominal Size 1/2″ ~ 2″ (DN15 ~ DN50)
Pressure Class Class 150 ~ 2500 LB (PN16 ~ PN420)
Connection Type Flanged (RF/RTJ) / Socket Weld (SW) / Butt Weld (BW) / Threaded (NPT)
Operation Lever Handle / Gear Operator / Pneumatic Actuator

Visualizza i dettagli
DN80-PN40-RF Soft Seated Floating Ball Valve

Nominal Size DN80
Pressure Rating PN40 (4.0 MPa / 40 bar)
End Connection Flanged, Raised Face (RF) — EN 1092 1 / ASME B16.5 or equivalent
Body Construction Floating ball, two piece or three piece design
Temperature Range –29°C ~ +150°C (depending on seat material)
Applicable Media Water, oil, gas, mild corrosive fluids, etc.
Flange Standard EN 1092 1 PN40 / ASME B16.5 Class 300 (customer specified)
Face to Face EN 558 Series 1 / ASME B16.10

Visualizza i dettagli
1″-800LB Vacuum Floating Ball Valve

Size 1 inch (DN25)
Pressure Class Class 800 LB (PN130 / 2000 PSI)
Body Material Stainless Steel (ASTM A182 F304 / F316 / F316L)
Manufacturing Process Forged Steel (Close Die Forged)
Design Standard ASME B16.34 / API 608 / API 6D
End Connection Standard ASME B1.20.1 (NPT) / ASME B16.25 (BW) / ASME B16.11 (SW)
Face to Face Standard Manufacturer Standard

Visualizza i dettagli

A ball valve is a type of quarter-turn valve that controls flow using a hollow, perforated, and pivoting ball inside the valve body. When the ball’s hole is aligned with the pipeline, fluid flows freely; when rotated 90 degrees, the flow is completely blocked. This simple mechanism makes ball valves highly reliable for shutoff and control applications. Ball valves are known for their tight sealing performance, durability, and ease of operation. They can handle high pressure and temperature conditions, and are suitable for gas, liquid, or even corrosive media, depending on the materials used. With minimal pressure drop and fast on-off control, ball valves are widely used in industries like oil and gas, water treatment, chemical processing, and general plumbing. They come in various types such as two-way, three-way, floating, and trunnion-mounted, and can be operated manually, pneumatically, or electrically.