DN100-PN25 Bellow Seal Globe Valve

Technical Datasheet: Bellows Seal Globe Valve

Product Name: Bellows Seal Globe Valve
Connection: Flanged Ends
Saiz Nominal: DN100 (4″)
Nominal Pressure: PN25
Body Construction: Cast Steel / Forged Steel

1. General Design Features

• Jenis: Bellows-sealed globe valve, straight-through pattern .
• Seal Design: Double sealing system. Primary seal is a multi-ply metal bellows welded to the stem, preventing external leakage. Secondary backup packing (graphite) provides additional safety .
• Bonnet Design: Bolted bonnet construction for easy maintenance .
• Back Seat: Standard back seat design allows for repacking under pressure (in open position) and protects the packing from system flow .
• Operasi: Rising stem with non-rising handwheel (indicates valve position) .
• Arah Aliran: Flow direction is typically “above the disc” (flow closes) for improved shut-off capability .

2. Applicable Standards & Specifications

3. Operating Parameters

4. Bill of Materials (Typical Material Selection)

Note: Material selection depends on the fluid temperature and corrosivity. Two common configurations are listed below.

5. Dimensional Data (DN100 PN25)

Note: Dimensions are standard references per DIN/EN standards. Verify with manufacturer’s drawing.

6. Inspection & Testing Procedure

• Shell Test: Valve partially open. Hydrostatic test at 1.5 times PN (38 bar) . Check body and bonnet joints for leaks .
• Seat Test: Valve closed. Hydrostatic test at 1.1 times PN (27.5 bar) . Check for leakage across the seat.
• Bellows Seal Test: Specific test to ensure the bellows integrity (usually with air or helium leak detection).
• Backseat Test: Verify backseat seal function when valve is fully open.

7. Features & Benefits

• Zero Leakage: The welded metal bellows eliminates stem leakage, reducing maintenance and improving safety for toxic or expensive media .
• Extended Service Life: Bellows compensates for thermal expansion and has high cycle life.
• Energy Savings: Prevents loss of valuable fluids or steam.
• Maintenance Friendly: Backup packing allows for sealing even in the unlikely event of bellows failure .
• ISO 5211 Mounting: Top flange (if specified) allows for easy mounting of actuators.

JAMINAN:

SAVVY VALVES komited untuk menyampaikan kualiti produk yang luar biasa dan perkhidmatan selepas jualan tanpa bimbang. Injap kami dijamin memberikan hayat perkhidmatan minimum selama 12 bulan, di mana kami akan membekalkan semua alat ganti yang diperlukan dan arahan penyelenggaraan terperinci secara percuma. Dalam tempoh jaminan, jika sebarang kerosakan bukan disebabkan oleh manusia berlaku, kami akan menggantikan komponen tanpa kos dan menyediakan sokongan teknikal profesional. Selepas jaminan tamat, pelanggan hanya perlu membayar kos alat ganti, sementara masih mendapat manfaat daripada perkhidmatan penyelenggaraan berdiskaun. Matlamat kami adalah untuk membantu pelanggan mengurangkan kos operasi dan meningkatkan kecekapan pengeluaran melalui kualiti yang boleh dipercayai dan sokongan selepas jualan yang komprehensif. Sama ada untuk pertanyaan teknikal atau keperluan penyelenggaraan, pasukan pakar kami akan bertindak balas dengan segera untuk memastikan sistem injap anda mengekalkan prestasi optimum pada setiap masa.