Monel Needle Globe Valve Ferrule End

Penerangan

Technical Datasheet: Monel Needle Valve (Double Ferrule Tube Fitting)

1. General Product Data

2. Pressure & Temperature Ratings

Note: Pressure ratings are temperature-dependent and decrease at the upper temperature limits.

3. Material of Construction (Wetted Parts)

4. Dimensional & Flow Data (Typical Values)

Note: Dimensions vary based on connection size.

5. Features & Design

• Packing Below Threads: Packing is located below the stem threads to prevent system media from coming into contact with the threads, reducing corrosion and fugitive emissions.
• Non-Rotating Stem Tip: Prevents galling (scoring) of the seat and stem tip, ensuring leak-tight shut-off and extending cycle life.
• Live-Loaded Packing: (Optional/Standard on some series) Utilizes a spring (Belleville washer) to maintain constant pressure on the packing, compensating for wear and temperature changes.
• Panel Mountable: Standard feature on most forged body designs.
• Safety Backstop: A handle stop prevents over-tightening and potential stem blowout.

6. Applicable Standards & Testing

• Standard Reka Bentuk: Designed to meet ANSI B16.34 / ASME standards.
• Inspection: Each valve is factory-tested for bubble-tight leakage at both the seat and the packing.
• Cleaning: Standard cleaning per ASTM G93 (or equivalent) for instrumentation and oxygen service (Special cleaning SC-11 available).
• Compliance: NACE MR0175 / ISO 15156 compliance available upon request for sour gas service.

7. How to Order (Typical Configuration Code)

When ordering, specify the configuration as follows:

Ordering Example: 2219-G8M (2219 Series, Gyrolok 1/2″, Monel Body)

JAMINAN:

SAVVY VALVES komited untuk menyampaikan kualiti produk yang luar biasa dan perkhidmatan selepas jualan tanpa bimbang. Injap kami dijamin memberikan hayat perkhidmatan minimum selama 12 bulan, di mana kami akan membekalkan semua alat ganti yang diperlukan dan arahan penyelenggaraan terperinci secara percuma. Dalam tempoh jaminan, jika sebarang kerosakan bukan disebabkan oleh manusia berlaku, kami akan menggantikan komponen tanpa kos dan menyediakan sokongan teknikal profesional. Selepas jaminan tamat, pelanggan hanya perlu membayar kos alat ganti, sementara masih mendapat manfaat daripada perkhidmatan penyelenggaraan berdiskaun. Matlamat kami adalah untuk membantu pelanggan mengurangkan kos operasi dan meningkatkan kecekapan pengeluaran melalui kualiti yang boleh dipercayai dan sokongan selepas jualan yang komprehensif. Sama ada untuk pertanyaan teknikal atau keperluan penyelenggaraan, pasukan pakar kami akan bertindak balas dengan segera untuk memastikan sistem injap anda mengekalkan prestasi optimum pada setiap masa.