Burried Coal Tar Coated U section High Performance Butterfly Valve 60″

Valve Type Double Eccentric Butterfly Valve (High Performance)
Application Buried Service / Underground Installation
Size 60 inches (DN 1500)
Pressure Rating Class 150LB (200psi)
Connection Type Flanged Ends (ASME B16.47 Series A or B as required)
Operation Electric Actuator with Extended Stem for buried service

Hubungi Kami

Penerangan

Technical Data Sheet

Buried Butterfly Valve – Double Eccentric – Electric Actuator

Product Name: Buried Double Eccentric Butterfly Valve

General Information

Item	Spesifikasi
Jenis Injap	Double Eccentric Butterfly Valve (High Performance)
Permohonan	Buried Service / Underground Installation
Saiz	60 inches (DN 1500)
Penilaian Tekanan	Class 150LB (200psi)
Connection Type	Flanged Ends (ASME B16.47 Series A or B as required)
Operasi	Electric Actuator with Extended Stem for buried service

Design Standards & Specifications

Item	Standard
Design & Manufacturing	API 609 (Category B), ASME B16.34
Face-to-Face Dimensions	API 609, ASME B16.10
Flange Dimensions	ASME B16.47 (Series A / MSS SP-44 or Series B / API 605)
Pressure Testing	API 598
Coating Standard (Buried)	GB/T 17459 or AWWA C210 (Coal Tar Epoxy)
Actuator Mounting	ISO 5211

Main Component Materials

Part Name	Material Specification
Badan	Ductile Iron ASTM A536, 60-40-18 / GGG40
Cakera	Ductile Iron / Stainless Steel (Optional)
Seat (Seal)	EPDM (Ethylene Propylene Diene Monomer) – Suitable for Water/Wastewater
Shaft / Stem	Stainless Steel 410 / 17-4PH (Extended Stem for burial)
Bushings	Self-Lubricating Bronze / PTFE Lined
Body O-Rings	Buna-N / EPDM
Boltwork	ASTM A193 B7 / A194 2H (Zinc Plated)
External Coating	Coal Tar Epoxy (Thick coating for buried service)

Technical Parameters & Dimensions (Reference)

Coating Specification:

Standard: Coal Tar Epoxy conforming to AWWA C210 or GB/T 17459 .
Color: Black
Dry Film Thickness: > 300 Microns (or as required for buried service)
Feature: High electrical resistance, anti-corrosive, and resistant to soil chemicals.

Valve Dimensions (Approximate values for 60″ / DN1500):

Dimension	Value (Approx.)	Nota
Face-to-Face (L)	600 mm – 800 mm	Dependent on API 609 Cat. B design
Flange O/D (D)	1380 mm – 1480 mm	ASME B16.47 Series A
Bolt Circle (D1)	1330 mm – 1430 mm	Dependent on flange standard
Number of Bolt Holes	48 – 56	/
Valve Height (w/o operator)	Custom	Dependent on extended stem length
Extended Stem Length	As per burial depth	Typically 2m, 3m, or as specified

Electric Actuator Specifications

Item	Requirement
Actuator Type	Heavy-duty Electric, Quarter-turn (90°)
Power Supply	380V AC / 50Hz / 3-Phase (or as specified)
Torque	≥ 1.5 x Required Valve Break Torque
Protection Class	IP68 (Watertight for buried applications)
Duty Cycle	S2 / S4 (Intermittent)
Motor Insulation	Class H / F
Manual Override	Handwheel with declutch mechanism
Limit Switch	Fully adjustable (Open/Close)
Control Type	On-Off / Modulating (4-20mA) as required

Menguji

Shell Test: 1.5 x Rated Pressure
Seat Test: 1.1 x Rated Pressure (Bi-directional)
Leakage Rate: Zero Leakage (API 598)

Technical Notes:

Double Eccentric Design: The shaft is offset from both the centerline of the disc and the body, reducing seat wear during operation.
Extended Stem: Allows the actuator to be positioned above ground while the valve body remains buried. The stem extension is sealed to prevent ingress of moisture and soil.
Buried Coating: The coal tar epoxy provides a durable barrier against galvanic corrosion and soil stress .

JAMINAN:

SAVVY VALVES komited untuk menyampaikan kualiti produk yang luar biasa dan perkhidmatan selepas jualan tanpa bimbang. Injap kami dijamin memberikan hayat perkhidmatan minimum selama 12 bulan, di mana kami akan membekalkan semua alat ganti yang diperlukan dan arahan penyelenggaraan terperinci secara percuma. Dalam tempoh jaminan, jika sebarang kerosakan bukan disebabkan oleh manusia berlaku, kami akan menggantikan komponen tanpa kos dan menyediakan sokongan teknikal profesional. Selepas jaminan tamat, pelanggan hanya perlu membayar kos alat ganti, sementara masih mendapat manfaat daripada perkhidmatan penyelenggaraan berdiskaun. Matlamat kami adalah untuk membantu pelanggan mengurangkan kos operasi dan meningkatkan kecekapan pengeluaran melalui kualiti yang boleh dipercayai dan sokongan selepas jualan yang komprehensif. Sama ada untuk pertanyaan teknikal atau keperluan penyelenggaraan, pasukan pakar kami akan bertindak balas dengan segera untuk memastikan sistem injap anda mengekalkan prestasi optimum pada setiap masa.

PRODUK JUALAN PANAS

Selama lebih 10 tahun, kami telah menjadi pembekal utama injap industri untuk projek global utama dalam bekalan air, minyak & gas, dan penyahgaraman.

Berita

Terkini berita

Malay