DN15-PN64-Ferrule Needle Valve

DN15 – PN64 – Ferrule Needle Valve

Technical Data Sheet

1. General Information

2. Design & Manufacturing Standards

3. Main Materials (Typical)

4. Outline Dimensions & Weight (Typical values – may vary by manufacturer)

 Dimensions above are typical references. Final dimensions to be confirmed with manufacturer’s drawing.

5. Pressure-Temperature Rating (Stainless Steel 316 body)

Note: PN64 is the maximum allowable working pressure at ambient temperature. As temperature increases, pressure must be derated per ASME B16.34. PTFE packing has a maximum service temperature of approx. 200°C; graphite packing is required for higher temperatures.

6. Performance Data

7. Ciri-ciri Utama

• Needle stem tip – Provides precise flow regulation for very low flow rates
• Twin ferrule connection – No welding required; reliable leak-tight seal; easy disassembly and maintenance
• Stainless steel body – Excellent corrosion resistance
• Blow-out proof stem – Ensures safety under high pressure
• Replaceable packing – Easy online adjustment or replacement
• Multiple stem tip options – Soft seat (PTFE/PEEK) or metal hard seat (sharp edge / blunt)
• Bi-directional sealing – Can withstand pressure from both directions (arrow indicates recommended flow direction)

8. Installation & Operation Instructions

1. Ferrule installation – Insert tube fully into the ferrule socket. Hand-tighten the nut, then tighten with a wrench 1 – 1.25 turns from finger-tight (follow manufacturer’s instructions).
2. Flow direction – An arrow on the body indicates recommended flow direction. The valve can be used bidirectionally, but pressure drop may differ slightly.
3. Operasi – Turn the handle clockwise to close, counterclockwise to open. Needle valves are designed for flow regulation; avoid long-term operation in fully closed or barely open positions.
4. Maintenance – If external leakage occurs, carefully tighten the packing nut after depressurizing. If leakage persists, replace the packing.

9. Ordering Information

Please provide the following when ordering:

1. Valve size (DN15), pressure rating (PN64)
2. End connection: Twin ferrule, tube O.D. (e.g., 12mm or 1/2″)
3. Body material (SS316 / SS304 / other)
4. Stem tip sealing type (metal needle tip / PTFE soft tip)
5. Packing material (PTFE / graphite)
6. Valve configuration (straight pattern / angle pattern)
7. Media name, temperature, and pressure
8. Additional accessories (panel mounting nut, dust cap, etc.)

JAMINAN:

SAVVY VALVES komited untuk menyampaikan kualiti produk yang luar biasa dan perkhidmatan selepas jualan tanpa bimbang. Injap kami dijamin memberikan hayat perkhidmatan minimum selama 12 bulan, di mana kami akan membekalkan semua alat ganti yang diperlukan dan arahan penyelenggaraan terperinci secara percuma. Dalam tempoh jaminan, jika sebarang kerosakan bukan disebabkan oleh manusia berlaku, kami akan menggantikan komponen tanpa kos dan menyediakan sokongan teknikal profesional. Selepas jaminan tamat, pelanggan hanya perlu membayar kos alat ganti, sementara masih mendapat manfaat daripada perkhidmatan penyelenggaraan berdiskaun. Matlamat kami adalah untuk membantu pelanggan mengurangkan kos operasi dan meningkatkan kecekapan pengeluaran melalui kualiti yang boleh dipercayai dan sokongan selepas jualan yang komprehensif. Sama ada untuk pertanyaan teknikal atau keperluan penyelenggaraan, pasukan pakar kami akan bertindak balas dengan segera untuk memastikan sistem injap anda mengekalkan prestasi optimum pada setiap masa.