Penerangan

Technical Data Sheet

3-Piece Trunnion Mounted Ball Valve

Project/Item: 3-Piece Fixed Ball Valve
Valve Size: 20 inches (20″)
Penilaian Tekanan: 150LB (Class 150)

1. General Information

2. Main Technical Parameters & Performance

3. Main Material Specifications

Based on WCB Body + 316 Trim requirements:

4. Main Dimensions (For 20″ Class 150)

Typical dimensions per ASME standards. Variations may occur between manufacturers.

5. Design Features & Requirements

1. 3-Piece Bolted Body: The body consists of three parts (Body + 2 End Caps) bolted together. This allows for easy maintenance (seat/ball replacement) without removing the entire valve from the pipeline.
2. Trunnion Mounted Ball: The ball is fixed and supported by upper and lower stems/bearings. This design is ideal for 20″ large bore applications, reducing operating torque and ensuring stable performance under high differential pressure.
3. Double Piston Effect (DPE) Seats: Standard seats provide bidirectional sealing. The valve typically features automatic cavity pressure relief (the upstream seat acts as a piston, allowing overpressure in the body cavity to vent into the pipeline).
4. Emergency Sealant Injection: The valve body is equipped with sealant injection fittings. In case of seat damage, sealant can be injected to temporarily restore sealing.
5. Peranti Anti Statik: A spring-loaded plunger/ball ensures electrical continuity between the ball, stem, and body to prevent static spark buildup.
6. Secondary Metal Seal: In the event the soft seat is destroyed by fire, the ball will contact the metal seat support, providing a metal-to-metal seal (Fire Safe feature).

Note:

• This data sheet is based on standard ASME/API specifications.
• The gearbox dimensions (height, handwheel size) and overall weight may vary depending on the manufacturer and gearbox model. Please refer to the final manufacturer’s drawing for certified dimensions.

JAMINAN:

SAVVY VALVES komited untuk menyampaikan kualiti produk yang luar biasa dan perkhidmatan selepas jualan tanpa bimbang. Injap kami dijamin memberikan hayat perkhidmatan minimum selama 12 bulan, di mana kami akan membekalkan semua alat ganti yang diperlukan dan arahan penyelenggaraan terperinci secara percuma. Dalam tempoh jaminan, jika sebarang kerosakan bukan disebabkan oleh manusia berlaku, kami akan menggantikan komponen tanpa kos dan menyediakan sokongan teknikal profesional. Selepas jaminan tamat, pelanggan hanya perlu membayar kos alat ganti, sementara masih mendapat manfaat daripada perkhidmatan penyelenggaraan berdiskaun. Matlamat kami adalah untuk membantu pelanggan mengurangkan kos operasi dan meningkatkan kecekapan pengeluaran melalui kualiti yang boleh dipercayai dan sokongan selepas jualan yang komprehensif. Sama ada untuk pertanyaan teknikal atau keperluan penyelenggaraan, pasukan pakar kami akan bertindak balas dengan segera untuk memastikan sistem injap anda mengekalkan prestasi optimum pada setiap masa.

Penerangan

Technical Data Sheet

3-Piece Trunnion Mounted Ball Valve

Project/Item: 3-Piece Fixed Ball Valve
Valve Size: 20 inches (20″)
Penilaian Tekanan: 150LB (Class 150)

1. General Information

2. Main Technical Parameters & Performance

3. Main Material Specifications

Based on WCB Body + 316 Trim requirements:

4. Main Dimensions (For 20″ Class 150)

Typical dimensions per ASME standards. Variations may occur between manufacturers.

5. Design Features & Requirements

1. 3-Piece Bolted Body: The body consists of three parts (Body + 2 End Caps) bolted together. This allows for easy maintenance (seat/ball replacement) without removing the entire valve from the pipeline.
2. Trunnion Mounted Ball: The ball is fixed and supported by upper and lower stems/bearings. This design is ideal for 20″ large bore applications, reducing operating torque and ensuring stable performance under high differential pressure.
3. Double Piston Effect (DPE) Seats: Standard seats provide bidirectional sealing. The valve typically features automatic cavity pressure relief (the upstream seat acts as a piston, allowing overpressure in the body cavity to vent into the pipeline).
4. Emergency Sealant Injection: The valve body is equipped with sealant injection fittings. In case of seat damage, sealant can be injected to temporarily restore sealing.
5. Peranti Anti Statik: A spring-loaded plunger/ball ensures electrical continuity between the ball, stem, and body to prevent static spark buildup.
6. Secondary Metal Seal: In the event the soft seat is destroyed by fire, the ball will contact the metal seat support, providing a metal-to-metal seal (Fire Safe feature).

Note:

• This data sheet is based on standard ASME/API specifications.
• The gearbox dimensions (height, handwheel size) and overall weight may vary depending on the manufacturer and gearbox model. Please refer to the final manufacturer’s drawing for certified dimensions.

JAMINAN:

SAVVY VALVES komited untuk menyampaikan kualiti produk yang luar biasa dan perkhidmatan selepas jualan tanpa bimbang. Injap kami dijamin memberikan hayat perkhidmatan minimum selama 12 bulan, di mana kami akan membekalkan semua alat ganti yang diperlukan dan arahan penyelenggaraan terperinci secara percuma. Dalam tempoh jaminan, jika sebarang kerosakan bukan disebabkan oleh manusia berlaku, kami akan menggantikan komponen tanpa kos dan menyediakan sokongan teknikal profesional. Selepas jaminan tamat, pelanggan hanya perlu membayar kos alat ganti, sementara masih mendapat manfaat daripada perkhidmatan penyelenggaraan berdiskaun. Matlamat kami adalah untuk membantu pelanggan mengurangkan kos operasi dan meningkatkan kecekapan pengeluaran melalui kualiti yang boleh dipercayai dan sokongan selepas jualan yang komprehensif. Sama ada untuk pertanyaan teknikal atau keperluan penyelenggaraan, pasukan pakar kami akan bertindak balas dengan segera untuk memastikan sistem injap anda mengekalkan prestasi optimum pada setiap masa.

Penerangan

Technical Data Sheet

3-Piece Trunnion Mounted Ball Valve

Project/Item: 3-Piece Fixed Ball Valve
Valve Size: 20 inches (20″)
Penilaian Tekanan: 150LB (Class 150)

1. General Information

2. Main Technical Parameters & Performance

3. Main Material Specifications

Based on WCB Body + 316 Trim requirements:

4. Main Dimensions (For 20″ Class 150)

Typical dimensions per ASME standards. Variations may occur between manufacturers.

5. Design Features & Requirements

1. 3-Piece Bolted Body: The body consists of three parts (Body + 2 End Caps) bolted together. This allows for easy maintenance (seat/ball replacement) without removing the entire valve from the pipeline.
2. Trunnion Mounted Ball: The ball is fixed and supported by upper and lower stems/bearings. This design is ideal for 20″ large bore applications, reducing operating torque and ensuring stable performance under high differential pressure.
3. Double Piston Effect (DPE) Seats: Standard seats provide bidirectional sealing. The valve typically features automatic cavity pressure relief (the upstream seat acts as a piston, allowing overpressure in the body cavity to vent into the pipeline).
4. Emergency Sealant Injection: The valve body is equipped with sealant injection fittings. In case of seat damage, sealant can be injected to temporarily restore sealing.
5. Peranti Anti Statik: A spring-loaded plunger/ball ensures electrical continuity between the ball, stem, and body to prevent static spark buildup.
6. Secondary Metal Seal: In the event the soft seat is destroyed by fire, the ball will contact the metal seat support, providing a metal-to-metal seal (Fire Safe feature).

Note:

• This data sheet is based on standard ASME/API specifications.
• The gearbox dimensions (height, handwheel size) and overall weight may vary depending on the manufacturer and gearbox model. Please refer to the final manufacturer’s drawing for certified dimensions.

JAMINAN:

SAVVY VALVES komited untuk menyampaikan kualiti produk yang luar biasa dan perkhidmatan selepas jualan tanpa bimbang. Injap kami dijamin memberikan hayat perkhidmatan minimum selama 12 bulan, di mana kami akan membekalkan semua alat ganti yang diperlukan dan arahan penyelenggaraan terperinci secara percuma. Dalam tempoh jaminan, jika sebarang kerosakan bukan disebabkan oleh manusia berlaku, kami akan menggantikan komponen tanpa kos dan menyediakan sokongan teknikal profesional. Selepas jaminan tamat, pelanggan hanya perlu membayar kos alat ganti, sementara masih mendapat manfaat daripada perkhidmatan penyelenggaraan berdiskaun. Matlamat kami adalah untuk membantu pelanggan mengurangkan kos operasi dan meningkatkan kecekapan pengeluaran melalui kualiti yang boleh dipercayai dan sokongan selepas jualan yang komprehensif. Sama ada untuk pertanyaan teknikal atau keperluan penyelenggaraan, pasukan pakar kami akan bertindak balas dengan segera untuk memastikan sistem injap anda mengekalkan prestasi optimum pada setiap masa.

Penerangan

Technical Data Sheet

3-Piece Trunnion Mounted Ball Valve

Project/Item: 3-Piece Fixed Ball Valve
Valve Size: 20 inches (20″)
Penilaian Tekanan: 150LB (Class 150)

1. General Information

2. Main Technical Parameters & Performance

3. Main Material Specifications

Based on WCB Body + 316 Trim requirements:

4. Main Dimensions (For 20″ Class 150)

Typical dimensions per ASME standards. Variations may occur between manufacturers.

5. Design Features & Requirements

1. 3-Piece Bolted Body: The body consists of three parts (Body + 2 End Caps) bolted together. This allows for easy maintenance (seat/ball replacement) without removing the entire valve from the pipeline.
2. Trunnion Mounted Ball: The ball is fixed and supported by upper and lower stems/bearings. This design is ideal for 20″ large bore applications, reducing operating torque and ensuring stable performance under high differential pressure.
3. Double Piston Effect (DPE) Seats: Standard seats provide bidirectional sealing. The valve typically features automatic cavity pressure relief (the upstream seat acts as a piston, allowing overpressure in the body cavity to vent into the pipeline).
4. Emergency Sealant Injection: The valve body is equipped with sealant injection fittings. In case of seat damage, sealant can be injected to temporarily restore sealing.
5. Peranti Anti Statik: A spring-loaded plunger/ball ensures electrical continuity between the ball, stem, and body to prevent static spark buildup.
6. Secondary Metal Seal: In the event the soft seat is destroyed by fire, the ball will contact the metal seat support, providing a metal-to-metal seal (Fire Safe feature).

Note:

• This data sheet is based on standard ASME/API specifications.
• The gearbox dimensions (height, handwheel size) and overall weight may vary depending on the manufacturer and gearbox model. Please refer to the final manufacturer’s drawing for certified dimensions.

JAMINAN:

SAVVY VALVES komited untuk menyampaikan kualiti produk yang luar biasa dan perkhidmatan selepas jualan tanpa bimbang. Injap kami dijamin memberikan hayat perkhidmatan minimum selama 12 bulan, di mana kami akan membekalkan semua alat ganti yang diperlukan dan arahan penyelenggaraan terperinci secara percuma. Dalam tempoh jaminan, jika sebarang kerosakan bukan disebabkan oleh manusia berlaku, kami akan menggantikan komponen tanpa kos dan menyediakan sokongan teknikal profesional. Selepas jaminan tamat, pelanggan hanya perlu membayar kos alat ganti, sementara masih mendapat manfaat daripada perkhidmatan penyelenggaraan berdiskaun. Matlamat kami adalah untuk membantu pelanggan mengurangkan kos operasi dan meningkatkan kecekapan pengeluaran melalui kualiti yang boleh dipercayai dan sokongan selepas jualan yang komprehensif. Sama ada untuk pertanyaan teknikal atau keperluan penyelenggaraan, pasukan pakar kami akan bertindak balas dengan segera untuk memastikan sistem injap anda mengekalkan prestasi optimum pada setiap masa.

Penerangan

Technical Data Sheet

3-Piece Trunnion Mounted Ball Valve

Project/Item: 3-Piece Fixed Ball Valve
Valve Size: 20 inches (20″)
Penilaian Tekanan: 150LB (Class 150)

1. General Information

2. Main Technical Parameters & Performance

3. Main Material Specifications

Based on WCB Body + 316 Trim requirements:

4. Main Dimensions (For 20″ Class 150)

Typical dimensions per ASME standards. Variations may occur between manufacturers.

5. Design Features & Requirements

1. 3-Piece Bolted Body: The body consists of three parts (Body + 2 End Caps) bolted together. This allows for easy maintenance (seat/ball replacement) without removing the entire valve from the pipeline.
2. Trunnion Mounted Ball: The ball is fixed and supported by upper and lower stems/bearings. This design is ideal for 20″ large bore applications, reducing operating torque and ensuring stable performance under high differential pressure.
3. Double Piston Effect (DPE) Seats: Standard seats provide bidirectional sealing. The valve typically features automatic cavity pressure relief (the upstream seat acts as a piston, allowing overpressure in the body cavity to vent into the pipeline).
4. Emergency Sealant Injection: The valve body is equipped with sealant injection fittings. In case of seat damage, sealant can be injected to temporarily restore sealing.
5. Peranti Anti Statik: A spring-loaded plunger/ball ensures electrical continuity between the ball, stem, and body to prevent static spark buildup.
6. Secondary Metal Seal: In the event the soft seat is destroyed by fire, the ball will contact the metal seat support, providing a metal-to-metal seal (Fire Safe feature).

Note:

• This data sheet is based on standard ASME/API specifications.
• The gearbox dimensions (height, handwheel size) and overall weight may vary depending on the manufacturer and gearbox model. Please refer to the final manufacturer’s drawing for certified dimensions.

JAMINAN:

SAVVY VALVES komited untuk menyampaikan kualiti produk yang luar biasa dan perkhidmatan selepas jualan tanpa bimbang. Injap kami dijamin memberikan hayat perkhidmatan minimum selama 12 bulan, di mana kami akan membekalkan semua alat ganti yang diperlukan dan arahan penyelenggaraan terperinci secara percuma. Dalam tempoh jaminan, jika sebarang kerosakan bukan disebabkan oleh manusia berlaku, kami akan menggantikan komponen tanpa kos dan menyediakan sokongan teknikal profesional. Selepas jaminan tamat, pelanggan hanya perlu membayar kos alat ganti, sementara masih mendapat manfaat daripada perkhidmatan penyelenggaraan berdiskaun. Matlamat kami adalah untuk membantu pelanggan mengurangkan kos operasi dan meningkatkan kecekapan pengeluaran melalui kualiti yang boleh dipercayai dan sokongan selepas jualan yang komprehensif. Sama ada untuk pertanyaan teknikal atau keperluan penyelenggaraan, pasukan pakar kami akan bertindak balas dengan segera untuk memastikan sistem injap anda mengekalkan prestasi optimum pada setiap masa.

Penerangan

Technical Data Sheet

3-Piece Trunnion Mounted Ball Valve

Project/Item: 3-Piece Fixed Ball Valve
Valve Size: 20 inches (20″)
Penilaian Tekanan: 150LB (Class 150)

1. General Information

2. Main Technical Parameters & Performance

3. Main Material Specifications

Based on WCB Body + 316 Trim requirements:

4. Main Dimensions (For 20″ Class 150)

Typical dimensions per ASME standards. Variations may occur between manufacturers.

5. Design Features & Requirements

1. 3-Piece Bolted Body: The body consists of three parts (Body + 2 End Caps) bolted together. This allows for easy maintenance (seat/ball replacement) without removing the entire valve from the pipeline.
2. Trunnion Mounted Ball: The ball is fixed and supported by upper and lower stems/bearings. This design is ideal for 20″ large bore applications, reducing operating torque and ensuring stable performance under high differential pressure.
3. Double Piston Effect (DPE) Seats: Standard seats provide bidirectional sealing. The valve typically features automatic cavity pressure relief (the upstream seat acts as a piston, allowing overpressure in the body cavity to vent into the pipeline).
4. Emergency Sealant Injection: The valve body is equipped with sealant injection fittings. In case of seat damage, sealant can be injected to temporarily restore sealing.
5. Peranti Anti Statik: A spring-loaded plunger/ball ensures electrical continuity between the ball, stem, and body to prevent static spark buildup.
6. Secondary Metal Seal: In the event the soft seat is destroyed by fire, the ball will contact the metal seat support, providing a metal-to-metal seal (Fire Safe feature).

Note:

• This data sheet is based on standard ASME/API specifications.
• The gearbox dimensions (height, handwheel size) and overall weight may vary depending on the manufacturer and gearbox model. Please refer to the final manufacturer’s drawing for certified dimensions.

JAMINAN:

SAVVY VALVES komited untuk menyampaikan kualiti produk yang luar biasa dan perkhidmatan selepas jualan tanpa bimbang. Injap kami dijamin memberikan hayat perkhidmatan minimum selama 12 bulan, di mana kami akan membekalkan semua alat ganti yang diperlukan dan arahan penyelenggaraan terperinci secara percuma. Dalam tempoh jaminan, jika sebarang kerosakan bukan disebabkan oleh manusia berlaku, kami akan menggantikan komponen tanpa kos dan menyediakan sokongan teknikal profesional. Selepas jaminan tamat, pelanggan hanya perlu membayar kos alat ganti, sementara masih mendapat manfaat daripada perkhidmatan penyelenggaraan berdiskaun. Matlamat kami adalah untuk membantu pelanggan mengurangkan kos operasi dan meningkatkan kecekapan pengeluaran melalui kualiti yang boleh dipercayai dan sokongan selepas jualan yang komprehensif. Sama ada untuk pertanyaan teknikal atau keperluan penyelenggaraan, pasukan pakar kami akan bertindak balas dengan segera untuk memastikan sistem injap anda mengekalkan prestasi optimum pada setiap masa.