DN400 PN16 Cast Iron Metal Seated Rising Stem Gate Valve

Penerangan

Technical Data Sheet

Outside Screw and Yoke (OS&Y) Gate Valve
(Bronze-Seated, Metal-to-Metal Design)

Product Name: OS&Y Solid Wedge Gate Valve (Bronze Seated)
Standard: BS5163 / PN16
Saiz: DN400 (16 inches)

1. General Design Features

• Jenis: Outside Screw and Yoke (OS&Y), Solid Wedge, Flanged Ends
• Seat Type: Metal-to-Metal (Bronze Seated)
• Reka bentuk batang: Rising stem (indicates open/close position)
• Operasi: Handwheel Operated (Gearbox is mandatory for this size due to high seating torque of metal seals)
• Permohonan: High-temperature fluids, Oils, Steam, Abrasive media, or where rubber is not suitable.

2. Applicable Standards

• Design & Manufacturing: BS5150 / BS5163 (Metal-seated variants often follow BS5150) / EN1171
• Face-to-Face Dimension: EN558-1 Series 3 (or BS2089)
• Flange Drilling: BS4504 / EN1092-2 PN16
• Test & Inspection: EN12266-1 (Rate A or B depending on spec)

3. Technical Parameters

*Note: Temperature range depends on the specific bronze alloy and gland packing material.

4. Main Component Materials

5. Dimensions & Connection Data (DN400 Reference)

*Note: Metal-seated solid wedge valves are often heavier than resilient seated valves. The dimensions below are estimates based on common BS standards. Request certified drawing for exact values. *

6. Critical Notes & Selection Tips

1. “Bronze Seated” Definition:

• This data sheet now reflects a true Bronze-to-Bronze seal. The wedge has a Bronze ring/face that mates with the Bronze seat in the body. This is a metal seat, not a resilient seat.

• Unlike soft-seal valves which rely on rubber compression, metal-seated valves require significant mechanical force to close tightly.
• For a DN400 PN16 metal-seated valve, a gearbox (worm gear) is NOT optional – it is mandatory. Please confirm the gearbox ratio with the supplier.

• Metal-seated valves cannot achieve “zero leakage” (bubble tight) like rubber-seated valves. They typically conform to ISO 5208 Rate D (0.1x DN mm³/s) or Rate E. Please confirm the acceptable leakage rate for your application.

• This bronze-on-bronze configuration is excellent for hot water, steam condensate, and some oil services where EPDM or NBR rubber would fail.

Action Required:
Please confirm with the manufacturer:

1. Gearbox Ratio & Output Torque (Is it suitable for manual operation under max differential pressure?)
2. Sealing Leakage Rate (ISO 5208 Rate D or better?)
3. Flange drilling details (BS4504 PN16) to match your pipeline.

JAMINAN:

SAVVY VALVES komited untuk menyampaikan kualiti produk yang luar biasa dan perkhidmatan selepas jualan tanpa bimbang. Injap kami dijamin memberikan hayat perkhidmatan minimum selama 12 bulan, di mana kami akan membekalkan semua alat ganti yang diperlukan dan arahan penyelenggaraan terperinci secara percuma. Dalam tempoh jaminan, jika sebarang kerosakan bukan disebabkan oleh manusia berlaku, kami akan menggantikan komponen tanpa kos dan menyediakan sokongan teknikal profesional. Selepas jaminan tamat, pelanggan hanya perlu membayar kos alat ganti, sementara masih mendapat manfaat daripada perkhidmatan penyelenggaraan berdiskaun. Matlamat kami adalah untuk membantu pelanggan mengurangkan kos operasi dan meningkatkan kecekapan pengeluaran melalui kualiti yang boleh dipercayai dan sokongan selepas jualan yang komprehensif. Sama ada untuk pertanyaan teknikal atau keperluan penyelenggaraan, pasukan pakar kami akan bertindak balas dengan segera untuk memastikan sistem injap anda mengekalkan prestasi optimum pada setiap masa.