3″-2500LB Open Die Forged Gate Valve

TECHNICAL DATA SHEET

Product Name: 3-inch 2500LB Open Die Forged Gate Valve – BW Ends
Model/Specification: 3″-2500LB-BW
Jenis Injap: Gate Valve
Connection Type: Kimpalan Punggung (BW)

1. Basic Design Parameters

2. Technical Specifications

3. Material of Construction (Recommended – Carbon Steel)

4. Main Dimensions & BW End Preparation

*Note: Dimensions are for Butt-Weld ends according to ASME B16.10 and ASME B16.25.*

4.1 End-to-End Dimensions (BW)

4.2 Weld End Preparation (per ASME B16.25)

• Bevel Angle: 37.5° (±2.5°)
• Root Face: 1.6 mm (1/16″) nominal
• Counterbore (if required): To match pipe schedule (e.g., Sch. 160, XXS) – specified by purchaser.
• End Preparation: Standard V-groove bevel for butt welding.

Note: Actual end preparation details (counterbore depth, bore diameter) should be confirmed based on the mating pipe schedule and project specifications.

5. Pressure-Temperature Rating (ASME B16.34)

Material: ASTM A105 (Carbon Steel)

6. Test Pressure (API 598)

7. Features & Applications

• Key Features:
• High Strength: Class 2500 rating for extreme high-pressure systems.
• Forged Body: Open Die Forging ensures a continuous grain structure, eliminating porosity and defects for maximum reliability.
• Erosion Resistance: Seat and gate surfaces are typically hard-faced with Stellite to resist wire drawing and corrosion.
• High-Temperature: Flexible graphite packing provides reliable sealing up to 650°C.
• Butt-Weld Ends: Allows permanent, leak-free installation into piping systems, suitable for high-pressure and high-temperature applications.
• Main Applications:
• High-Pressure Steam Systems (Power Plants)
• Hydrocracking Units (Refineries)
• Wellhead / Choke Manifolds (Oil & Gas)
• High-Pressure Gas Transmission Lines

Disclaimer: The above data is prepared based on common standards. Specific dimensions, materials, and pressure ratings may vary by manufacturer. The final technical agreement shall prevail.

JAMINAN:

SAVVY VALVES komited untuk menyampaikan kualiti produk yang luar biasa dan perkhidmatan selepas jualan tanpa bimbang. Injap kami dijamin memberikan hayat perkhidmatan minimum selama 12 bulan, di mana kami akan membekalkan semua alat ganti yang diperlukan dan arahan penyelenggaraan terperinci secara percuma. Dalam tempoh jaminan, jika sebarang kerosakan bukan disebabkan oleh manusia berlaku, kami akan menggantikan komponen tanpa kos dan menyediakan sokongan teknikal profesional. Selepas jaminan tamat, pelanggan hanya perlu membayar kos alat ganti, sementara masih mendapat manfaat daripada perkhidmatan penyelenggaraan berdiskaun. Matlamat kami adalah untuk membantu pelanggan mengurangkan kos operasi dan meningkatkan kecekapan pengeluaran melalui kualiti yang boleh dipercayai dan sokongan selepas jualan yang komprehensif. Sama ada untuk pertanyaan teknikal atau keperluan penyelenggaraan, pasukan pakar kami akan bertindak balas dengan segera untuk memastikan sistem injap anda mengekalkan prestasi optimum pada setiap masa.