What is a gate valve used for?

It’s used to start or stop the flow in a pipeline.

Can a gate valve be used for flow control?

No, it’s not suitable for throttling.

Is a gate valve better than a ball valve?

Each has different uses—gate valves are better for isolation in large systems.

What media can gate valves handle?

They can handle water, oil, gas, steam, and slurry.

How do I know if a gate valve is open or closed?

In rising stem types, the stem position indicates the valve status.

게이트 밸브

Metal Seated RS Gate Valve

Valve Type Rising Stem Gate Valve (OS&Y – Outside Screw & Yoke)
Body Material Cast Iron (ASTM A126 Class B / EN-GJL-250)
Seat Material Bronze (Integral or renewable)
Stem Material Brass (C36000 / C37700)
End Connection Flanged (ASME B16.1 Class 125 / EN 1092-2)
Operation Handwheel
Design Standard MSS SP-70 / ASME B16.34 (mod)
Face-to-Face ASME B16.10 / MSS SP-70 (Flanged ends)
Flange Dimension ASME B16.1 Class 125 / EN 1092-2 PN10/PN16
Inspection & Test API 598 / MSS SP-70
Pressure Rating Class 125 / PN10 / PN16
Size Range 2″ – 12″ (DN50 – DN300)

세부 정보 보기
Non-Rising Stem Rubber Seated Gate Valve

1. Valve Type Non-Rising Stem (NRS) Resilient Wedge Gate Valve
2. Design Standard AWWA C509, ISO 5208, BS EN 1074-1
3. Size Range DN50 to DN600 (2″ to 24″)
4. Pressure Rating PN10/PN16 (150 psi / 230 psi)
• Test Pressure: 1.5×PN (Shell), 1.1×PN (Seat)
5. Temperature Range -10°C to +80°C (Standard EPDM)
-30°C to +130°C (Optional FKM)

세부 정보 보기
NRS Metal Seated Gate Valve(Key)

Valve Type Non-Rising Stem Gate Valve (Inside Screw)
Body Material Cast Iron (ASTM A126 Class B / EN-GJL-250)
Seat Material Bronze (Integral or renewable)
Stem Material Brass (C36000 / C37700)
End Connection Threaded (Female NPT per ASME B1.20.1)
Operation Square Head (For wrench operation)
Design Standard MSS SP-70 / MSS SP-80 (Bronze trim) / ASME B16.34 (mod)
Face-to-Face Manufacturer standard per MSS SP-70 (Threaded ends)

세부 정보 보기
NRS Metal-Seated Gate Valve

Nominal Diameter (DN) mm DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600
Nominal Pressure (PN) Bar PN10 / PN16 / PN25
Working Pressure – Max allowable pressure decreases as temperature increases (Refer to Pressure-Temperature rating chart)

세부 정보 보기
Open Die-Forged Gate Valve （PSB）

Nominal Size (NPS) 1/2″ ~ 2″ (DN15 ~ DN50)
Pressure Class Class 1500 / Class 2500 / Class 4500 (Custom)
Connection Type Butt-Weld Ends (BW) conforming to ASME B16.25 Temperature Range -29°C ~ +550°C (-20°F ~ +1022°F) Applicable Media High-pressure steam, Hot water, Oil & Gas, Power generation applications
Design Standard API 602 / ASME B16.34 / ISO 15761

세부 정보 보기
Plumbing Gate Valve Flanged

Valve Type Inside Screw, Non-Rising Stem Gate Valve
Bonnet Connection Threaded (Screwed) • Tapered Thread (BSPT/NPT)
Size Range ¼” to 4″ (DN8 to DN100)
Body/Bonnet Material 59-1 Brass (CuZn40Pb2 • GB/T 5231)
Stem 59-1 Brass • ACME Thread (Inside Body) • Square Head for Wrench
Disc Solid Brass Wedge (59-1) • Flexible Design
Seat Integral Body Seat (Machined Brass)
Seals EPDM Stem O-rings (Standard) • Optional: PTFE/VITON®

세부 정보 보기
DN800-PN16 Cast Iron Metal Seated Non-Rising Stem Gate Valve

Nominal Size DN800 (32″)
Pressure Rating PN16
End Connection Flanged Ends
Flange Standard DIN EN 1092-2 (PN16, Ductile Iron Flanges, Flat Face / Raised Face)
Face-to-Face Dimension DIN3352 F4 / DIN EN 558 Series 1 (470 mm)
Design & Manufacture Standard DIN3352 (Part 4 / Type F4)
Test & Inspection Standard DIN EN 12266-1

세부 정보 보기
DN400 PN16 Cast Iron Metal Seated Rising Stem Gate Valve

• Type: Outside Screw and Yoke (OS&Y), Solid Wedge, Flanged Ends
• Seat Type: Metal-to-Metal (Bronze Seated)
• Stem Design: Rising stem (indicates open/close position)
• Operation: Handwheel Operated (Gearbox is mandatory for this size due to high seating torque of metal seals)
• Application: High-temperature fluids, Oils, Steam, Abrasive media, or where rubber is not suitable.

세부 정보 보기
4″-5000 PSI-BW API 6A DM Mud Gate Valve

Nominal Size 4″ (DN 100)
Rated Working Pressure 5000 PSI (35 MPa / 345 bar)
End Connection Butt Weld (BW)
Valve Type Mud Gate Valve
Structure Rising Stem
Operation Manual (Hand Wheel Operated)
Sealing Type Metal-to-Rubber / Metal-to-Metal
Temperature Range P-U: -20°F to 250°F (-29°C to 121°C)
Service Media Drilling Mud, Water, Natural Gas, Oil, Sour Gas (H₂S/CO₂)

세부 정보 보기
3″ – 5000 PSI – BW API 6A DM Mud Gate Valve

Nominal Size 3″ (DN 80)
Rated Working Pressure 5000 PSI (35 MPa / 345 bar)
End Connection Butt Weld (BW)
Valve Type Mud Gate Valve
Structure Rising Stem
Operation Manual (Hand Wheel Operated)
Sealing Type Metal-to-Rubber / Metal-to-Metal
Temperature Range P-U: -20°F to 250°F (-29°C to 121°C)
Service Media Drilling Mud, Water, Natural Gas, Oil, Sour Gas (H₂S/CO₂)

세부 정보 보기
2″ – 5000 PSI – BW API 6A DM Mud Gate Valve

Nominal Size 2″ (DN 50)
Rated Working Pressure 5000 PSI (35 MPa / 345 bar)
End Connection Butt Weld (BW)
Valve Type Mud Gate Valve
Structure Rising Stem
Operation Manual (Hand Wheel Operated)
Sealing Type Metal-to-Rubber / Metal-to-Metal
Temperature Range P-U: -20°F to 250°F (-29°C to 121°C)
Service Media Drilling Mud, Water, Natural Gas, Oil, Sour Gas (H₂S/CO₂)

세부 정보 보기

게이트 밸브는 파이프라인의 유체 흐름을 완전히 차단하거나 허용하는 밸브 유형입니다. 유량 조절보다는 개폐 제어용으로 주로 설계되었습니다. 밸브가 완전히 열리면 게이트가 완전히 들어 올려져 압력 강하를 최소화하면서 원활한 흐름을 보장합니다. 닫히면 게이트가 완전히 밀폐되어 흐름을 완전히 차단합니다. 게이트 밸브는 밸브가 장시간 완전히 열리거나 완전히 닫힌 상태로 유지되는 시스템에서 가장 효과적입니다. 부분적으로 열린 게이트가 진동하여 마모를 유발하고 밸브를 손상시킬 수 있으므로, 유량 조절용으로는 적합하지 않습니다. 게이트 밸브는 견고한 구조와 높은 압력 및 고온을 견딜 수 있는 능력 덕분에 급수 시스템, 석유 및 가스 파이프라인, 산업 분야에서 널리 사용됩니다. 일반적인 재질로는 주철, 스테인리스강, 황동 등이 있으며, 특정 매체 및 환경에 맞는 맞춤형 옵션이 제공됩니다. 게이트 밸브는 내구성, 견고한 밀폐성, 긴 수명으로 유명하여 많은 중장비 응용 분야에서 선호됩니다.