DN40-PN40 BW Ends SS Y Strainer

Nominal Size DN40 (1 1/2 inch)
Pressure Rating PN40
Working Pressure Up to 40 bar (Depending on Temperature)
Temperature Range -29°C to 300°C (-20°F to 572°F) * (Dependent on gasket/seal material)*
Connection Ends Butt Weld (BW) – Beveled ends for welding
Flow Direction As indicated by arrow on body (typically single direction)
Filtering Area Ratio 3:1 to 5:1 (Screen to pipe area)

문의하기

TECHNICAL DATA SHEET

Product Name: DN40 PN40 Stainless Steel Y-Type Strainer (Butt Weld Ends)

Product Description

This is a high-quality Y-type strainer designed for the protection of pipeline equipment such as pumps, valves, and flow meters. It is manufactured from stainless steel to remove solid particles from liquid or gas media. The butt weld ends ensure a permanent, leak-proof seal when welded into the pipeline. The “Y” pattern design allows for a compact installation and easy maintenance with low pressure drop.

주요 특징

Design: Compact Y-pattern design ideal for horizontal or vertical pipelines (flow direction downwards).
본체 소재: Full Stainless Steel construction (CF8/CF8M or forged equivalent) providing excellent corrosion resistance.
Connection: Butt Weld (BW) ends conforming to ASME B16.25 or EN 12627, suitable for high-integrity welding.
Screen: Perforated or mesh screen in Stainless Steel for effective particle filtration.
Maintenance: Easy access to the screen via a threaded or bolted cover plug without removing the strainer body from the pipeline.
Blow-off Connection: Optional side drain plug for flushing out debris.

Technical Specifications

매개변수	사양
공칭 크기	DN40 (1 1/2 inch)
압력 등급	PN40
Working Pressure	Up to 40 bar (Depending on Temperature)
온도 범위	-29°C to 300°C (-20°F to 572°F) * (Dependent on gasket/seal material)*
Connection Ends	Butt Weld (BW) – Beveled ends for welding
Flow Direction	As indicated by arrow on body (typically single direction)
Filtering Area Ratio	3:1 to 5:1 (Screen to pipe area)

Material of Construction

Part Name	Material / Standard
Body (Strainer Housing)	SS 304 / SS 316 (Cast: ASTM A351 CF8/CF8M or Forged: ASTM A182)
Cover / Plug	SS 304 / SS 316
Screen	SS 304 / SS 316 (Perforated or Woven Mesh)
Gasket / Seal	Compressed Non-Asbestos Fiber (CNAF) / Graphite
Fasteners (Bolts)	Stainless Steel (if cover is bolted)

Note: Please specify if CF8 (304) or CF8M (316) material is required.

Applicable Standards

Design & Manufacture: ASME B16.34 / EN 13709 or similar.
Face-to-Face Dimensions: Manufacturer’s standard (in-line).
End Connections: ASME B16.25 (Butt Weld) or EN 12627.
Testing: API 598 / EN 12266-1.

Dimensions (Reference: mm / inches)

Dimensions are typical and may vary slightly depending on the manufacturer’s design.

크기	D (Body Dia.)	L (Face-to-Face Length)	H (Overall Height)	Screen Dia.	Weight (approx.)
DN40 (1.5″)	50 mm	200 – 230 mm	110 mm	40 mm	3.5 – 4.5 kg

Note: The Face-to-Face length (L) varies by manufacturer. The Height (H) is from centerline to top of cover plug.

Screen Specifications (Standard Offering)

Screen Type	Mesh / Perforation	Retention (Particle Size)	애플리케이션
Perforated	1.5 mm – 3.0 mm dia.	Coarse Filtration	Water, Slurries, General Protection
Mesh Lined	20 mesh to 100 mesh	Fine Filtration	Steam, Light Oil, Gas

Note: Screens can be customized for specific filtration requirements.

Test Pressure (Hydrostatic)

Test Procedure	Pressure (Bar)
Shell (Body) Test	60 Bar (1.5 x PN Rating)
Seat (Sealing) Test	N/A (Strainers typically have no pressure-sealing seat)

Disclaimer: The information provided above is based on standard industry practices. For physical specifications and custom configurations, please refer to the official drawings or consult the factory. It is recommended to verify material and mesh compatibility for specific media and operating conditions.

보증:

SAVVY VALVES는 탁월한 제품 품질과 안심할 수 있는 애프터서비스를 제공하기 위해 최선을 다하고 있습니다. 당사 밸브는 최소 12개월의 서비스 수명을 보장하며, 이 기간 동안 필요한 모든 예비 부품과 자세한 유지보수 지침을 무상으로 제공합니다. 보증 기간 내에 인위적인 손상이 아닌 다른 원인으로 인한 손상이 발생할 경우, 무상으로 부품을 교체하고 전문 기술 지원을 제공합니다. 보증 기간이 만료된 후에는 예비 부품 비용만 지불하시면 되며, 할인된 유지보수 서비스 혜택도 누리실 수 있습니다. 당사의 목표는 신뢰할 수 있는 품질과 포괄적인 애프터서비스를 통해 고객의 운영 비용을 절감하고 생산 효율성을 향상시키는 것입니다. 기술 문의나 유지보수가 필요하시면 언제든지 전문가 팀이 신속하게 대응하여 밸브 시스템이 항상 최적의 성능을 유지하도록 보장합니다.