6″-600LB High Temp. Triple Offset Butterfly Valve

Valve Type Triple Offset Hard-Seated Butterfly Valve (with Cooling Fins)
Nominal Diameter (DN) DN50 ~ DN1200
Nominal Pressure (PN) PN10 ~ PN100 (or Class 150 ~ 600)
Applicable Medium Steam, High-temperature oil, High-temperature flue gas, Thermal fluid, etc.
Applicable Temperature With cooling fins: Up to 650°C
Connection Type Wafer type / Flanged / Butt-welded
Operation Type Handwheel with gearbox / Pneumatic / Electric / Electro-hydraulic
Function Mode On-Off / Control

문의하기

설명

High Temperature High Pressure Triple Offset Butterfly Valve Technical Data Sheet (with Cooling Fins)

Valve Basic Information

Item	Standard Parameter	Option / Fill-in Column
밸브 유형	Triple Offset Hard-Seated Butterfly Valve (with Cooling Fins)	【】
공칭 직경(DN)	DN50 ~ DN1200	【】 mm
Nominal Pressure (PN)	PN10 ~ PN100 (or Class 150 ~ 600)	【】 MPa / 【】 Class
Applicable Medium	Steam, High-temperature oil, High-temperature flue gas, Thermal fluid, etc.	【】
Applicable Temperature	With cooling fins: Up to 650°C	Max. working temperature: 【】°C
Connection Type	Wafer type / Flanged / Butt-welded	【】
Operation Type	Handwheel with gearbox / Pneumatic / Electric / Electro-hydraulic	【】
Function Mode	On-Off / Control	【】

Design Codes and Standards

Item	Standard Adopted
Design & Manufacture	JB/T 8527, ANSI B16.34
Face-to-Face / End-to-End	GB/T 12221, ISO5752, ANSI B16.10
Flange Connection	JB/T 79.1, HG20592, ANSI B16.5, ANSI B16.47
Butt-welding Ends	GB/T 12224, ANSI B16.25
Pressure Test	GB/T 13927, API 598, ANSI B16.104

Structural Features and Design Parameters

Item	Technical Requirement	Confirmation
Design Principle	Triple offset (axial, radial, angular offset), ensuring zero friction during opening/closing	【Yes/No】
Cooling Fin Design	Cooling fins integrated into valve body neck or bonnet extension to block heat bridge, protect stuffing box and actuator	【Yes/No】
Sealing Class	Bidirectional zero leakage, ANSI Class VI (bubble-tight) or higher	【】
Flow Characteristic	Approximate equal percentage	【】
Rangeability	30:1 ~ 100:1	【】
Stem Sealing	Flexible graphite packing, extended stuffing box + cooling fins, self-sealing gland, anti-blowout design	【High-temp专用】
Fire-safe Design	Optional, meeting API 607 / 6FA	【Yes/No】

Main Component Materials

Part Name	Standard Material	Optional Material (depending on service)	Selection
몸	WCB (Carbon Steel)	WC9 (Cr-Mo Steel, high temp), CF8 (304), CF8M (316)	【】
디스크	WCB / Carbon Steel	304, 316, Alloy Steel (high-temp grade)	【】
줄기	2Cr13	17-4PH, Inconel (high-temp high-strength), 304, 316	【】
Seat / Disc Seal Face	Multi-layer metal seal (304+graphite)	Full hardfacing (Stellite, wear & erosion resistant)	【】
Bushing / Bearing	Self-lubricating metal-graphite (high temp)	High-temp alloy + solid lubricant coating	【】
Packing / Gasket	Flexible graphite (high temp)	Ceramic fiber + graphite combination (ultra-high temp)	【】
Cooling Fin Material	Carbon Steel / Stainless Steel	Same as body material	【】

Dimensions and Connections (Unit: mm)

Note: Cooling fin structure increases overall valve height; to be confirmed by manufacturer.

DN	Face-to-Face L (Wafer/Flanged)	Height H (incl. cooling fins & support)	Flange Bolt Circle D1	No. of Bolt Holes – Dia.
100	190	【Height with fins】	【Fill in】	【Fill in】
150	210	【Height with fins】	【Fill in】	【Fill in】
200	230	【Height with fins】	【Fill in】	【Fill in】
250	250	【Height with fins】	【Fill in】	【Fill in】
300	270	【Height with fins】	【Fill in】	【Fill in】

Actuator Parameters (for automated valves)

Item	Pneumatic Actuator	Electric Actuator
Model	【e.g., AW series / Cylinder type】	【e.g., ZDT9 series】
Action Type	Double-acting / Single-acting (spring return)	On-Off / Modulating
Air Supply Pressure	0.4 ~ 0.7 MPa	—
Power Supply	—	220V AC / 380V AC / Other
Accessories Required	Solenoid valve, limit switch, positioner, filter regulator	Torque limiter, heater, local control station
Connection to Valve	Via extended yoke with cooling fins to protect actuator from high temperature	Via extended yoke with cooling fins to protect actuator from high temperature

Testing and Inspection

Shell Test: 1.5 × Rated Pressure (MPa)
Seal Test: 1.1 × Rated Pressure (MPa)
Air Tightness Test: 0.6 MPa (if required)

Remarks / Special Requirements

(e.g., Oil-free treatment, degreasing, low-temperature impact test requirements, heat tracing interface, etc.)

Cooling Fin Configuration Requirements (New)

Item	Standard / Requirement	Confirmation
Cooling Fin Arrangement	□ Integral fins on valve body neck □ Extended bonnet with fins □ Extended stuffing box with fins	【】
Technical Requirement	Cooling fins shall effectively block heat transfer to actuator, ensure stuffing box temperature ≤【】°C, actuator ambient temperature ≤【】°C	【】
Cooling Fin Material	Same as body material or better heat-resistant steel	【】
Cooling Effect Verification	Manufacturer to provide heat transfer calculation or application reference under similar conditions	【Yes/No】
Optional Cooling Method	□ Natural convection (fins) □ Forced cooling (water/air cooling jacket, for ultra-high temp)	【】

Supplementary Selection Notes (with Cooling Fins):

When cooling fins are necessary: When medium temperature exceeds 200°C, it is recommended to consider cooling fins or an extended yoke. When temperature exceeds 400°C, an extended bonnet with cooling fins or a finned yoke is mandatory; otherwise, high temperature conducted through the stem can damage the packing and actuator electronics (e.g., positioner, motor) .
Cooling fin effect: By increasing the exposed surface area and lengthening the heat conduction path (heat bridge interruption), cooling fins effectively reduce the temperature at the bottom of the stuffing box, keeping it within the allowable range for flexible graphite or other packing materials .
Ultra-high temperature special treatment: If the temperature exceeds 650°C or the medium is highly corrosive, in addition to cooling fins, considerations may include water-cooled disc or refractory lining. This requires separate confirmation with the manufacturer .

보증:

SAVVY VALVES는 탁월한 제품 품질과 안심할 수 있는 애프터서비스를 제공하기 위해 최선을 다하고 있습니다. 당사 밸브는 최소 12개월의 서비스 수명을 보장하며, 이 기간 동안 필요한 모든 예비 부품과 자세한 유지보수 지침을 무상으로 제공합니다. 보증 기간 내에 인위적인 손상이 아닌 다른 원인으로 인한 손상이 발생할 경우, 무상으로 부품을 교체하고 전문 기술 지원을 제공합니다. 보증 기간이 만료된 후에는 예비 부품 비용만 지불하시면 되며, 할인된 유지보수 서비스 혜택도 누리실 수 있습니다. 당사의 목표는 신뢰할 수 있는 품질과 포괄적인 애프터서비스를 통해 고객의 운영 비용을 절감하고 생산 효율성을 향상시키는 것입니다. 기술 문의나 유지보수가 필요하시면 언제든지 전문가 팀이 신속하게 대응하여 밸브 시스템이 항상 최적의 성능을 유지하도록 보장합니다.