1″-800LB-Nipples 3 Piece Vacuum Ball Valve

Nominal Size 1 inch (DN 25)
Pressure Class Class 800LB (equivalent to PN 140 bar)
End Connections Integral Nipples (Socket Weld or Butt Weld) – per ASME B16.11 or ASME B16.25
Body Construction 3-Piece (center body with two end caps)
Valve Type Floating ball, full port or reduced port (as specified)
Stem Sealing Live-loaded packing or PTFE/stainless steel bellows (for vacuum service)
Operation Lever handle (standard), gear operator, or actuator (optional)
Vacuum Rating Suitable for high vacuum (1×10⁻⁶ Torr and above)

문의하기

1″-800LB-Nipples 3 Piece Vacuum Ball Valve

Technical Data Sheet

Product: 3-Piece Vacuum Ball Valve with Nipples
Model / Size: 1″ – 800LB – Nipples
구성: Three-piece body construction with integral nipples (socket weld or butt weld ends) for vacuum service

Product Description

This valve is a three-piece ball valve specifically designed for vacuum service, featuring integral nipples (short pipe extensions) welded or integrally formed on both ends. The three-piece construction allows for easy in-line maintenance without removing the entire valve from the piping system. The valve is rated for Class 800LB pressure, making it suitable for high-pressure vacuum applications, gas handling, and critical process systems where absolute leak integrity is required. It is ideal for vacuum systems, high-purity gas lines, and high-cycle applications where reliable shut-off is essential.

Basic Parameters

Item	매개변수
공칭 크기	1 inch (DN 25)
Pressure Class	Class 800LB (equivalent to PN 140 bar)
End Connections	Integral Nipples (Socket Weld or Butt Weld) – per ASME B16.11 or ASME B16.25
차체 구조	3-Piece (center body with two end caps)
밸브 유형	Floating ball, full port or reduced port (as specified)
Stem Sealing	Live-loaded packing or PTFE/stainless steel bellows (for vacuum service)
작업	Lever handle (standard), gear operator, or actuator (optional)
Vacuum Rating	Suitable for high vacuum (1×10⁻⁶ Torr and above)

설계 표준

Item	기준
Design & Manufacture	ASME B16.34 / API 608 (or manufacturer’s standard)
End Connections (Nipples)	ASME B16.11 (Socket Weld) or ASME B16.25 (Butt Weld)
Face-to-Face Dimensions	Manufacturer’s standard (with nipples)
Inspection & Testing	API 598 / ISO 5208; vacuum leak test per ASME PVHO or helium mass spectrometry
Vacuum Testing	Helium leak test with leakage rate ≤ 1×10⁻⁶ Pa·m³/s (or better)
Material Traceability	EN 10204 3.1 (optional)

Bill of Materials (Typical Configuration)

Part Name	Material (Typical Options)	비고
Body (Center)	A105 / A182 F316 / A182 F304	Forged steel or stainless steel
End Caps (x2)	A105 / A182 F316 / A182 F304	Same material as body
Nipples (x2)	A106 Gr.B / A312 TP316	Integral or welded extensions
공	A182 F316 / A182 F304	Chrome plated or electropolished for vacuum service
Seats	PTFE / Reinforced PTFE / PEEK	Low outgassing materials for vacuum
줄기	A182 F316 / A182 F304	Precision machined
Stem Packing / Seals	PTFE / Graphite / Bellows (optional)	Low leakage, vacuum-rated
Body Seals (End Caps)	PTFE / Spiral wound gasket	Vacuum-tight sealing
Handle / Operator	Stainless steel / Carbon steel	Locking handle option available

Dimensions & Weight (Reference)

Item	Value
Overall Length (End-to-End)	Approx. 200 ~ 250 mm (including nipples, manufacturer dependent)
Overall Height	Approx. 100 ~ 120 mm (lever type)
Nipple Length (each)	Approx. 50 ~ 75 mm (varies by manufacturer)
Nipple End Type	Socket Weld (per ASME B16.11) or Butt Weld (per ASME B16.25)
Approx. Weight	4.5 ~ 7.5 kg (depending on material and nipple length)

Note: Dimensions and weights are typical values and may vary by manufacturer.

Operating Conditions

Item	매개변수
Suitable Media	Vacuum, gases, high-purity fluids, corrosive media, cryogenic liquids
Vacuum Rating	1×10⁻⁶ Torr (higher vacuum achievable with bellows seal and metal seats)
Temperature Range (PTFE Seats)	-29°C ~ 180°C
Temperature Range (PEEK Seats)	-29°C ~ 250°C
Temperature Range (Graphite Packing)	-29°C ~ 425°C (with metal seats)
Max. Allowable Pressure	Approx. 13.8 MPa (138 bar) at ambient temperature (38°C)
Leakage Rate (Vacuum)	≤ 1×10⁻⁶ Pa·m³/s (helium mass spectrometry)

Testing & Inspection

Test	Requirement
Shell Strength Test	1.5 times rated pressure (hydrostatic); no leakage
High-Pressure Seat Test	1.1 times rated pressure; zero visible leakage (tight shut-off)
Low-Pressure Pneumatic Test	0.6 MPa compressed air; seat and stem leakage within allowable limits
Vacuum Leak Test	Helium mass spectrometry; leakage rate ≤ 1×10⁻⁶ Pa·m³/s (or as specified)
Operational Test	Full cycle test (opening/closing) under pressure and vacuum conditions
Material Verification	Positive Material Identification (PMI) on critical components
Cleanliness	Degreased and cleaned for oxygen or high-purity service (as required)

Features & Benefits

Vacuum Service Optimized: Low outgassing materials, helium leak-tested, and precision-machined components ensure high vacuum integrity.
Three-Piece Construction: Allows for in-line maintenance – end caps can be removed to access ball and seats without disturbing pipe connections.
Integral Nipples: Pre-welded or integrally formed nipples simplify field installation, reducing welding points and potential leak paths.
High Pressure Capability: Class 800 rating suitable for high-pressure gas and liquid systems, including hydraulic and pneumatic applications.
Tight Shut-Off: PTFE or PEEK seats provide zero-leakage sealing in both directions.
Low Operating Torque: Smooth ball and seat surfaces ensure easy operation, even under differential pressure.
Locking Handle (Optional): Prevents unauthorized operation – essential for safety-critical systems.
Fugitive Emission Compliance: Stem sealing can be designed to meet ISO 15848 or TA-Luft standards.

Important Notes

Vacuum Service: For ultra-high vacuum (UHV) applications, specify metal seats and bellows stem seal to achieve leakage rates below 1×10⁻⁹ Pa·m³/s.
Installation: The valve may be installed in any orientation. Ensure proper support for piping to avoid stress on the valve body.
Cleaning: For oxygen service or high-purity vacuum applications, the valve must be specified with degreasing and cleaning per ASTM G93 or CGA G-4.1.
Nipple Ends: Confirm whether nipples are socket weld (SW) or butt weld (BW) to match piping specifications. Socket weld nipples require fillet welding; butt weld nipples require full penetration butt welds.
Maintenance: When replacing seats or seals, use manufacturer-approved kits to maintain vacuum integrity.
Material Compatibility: Verify seat and seal materials are compatible with the process media to prevent swelling, degradation, or outgassing.

If you require additional specifications such as NACE MR0175, oxygen cleaning, high-temperature bellows seal, or actuator mounting, please let me know and I can supplement the data sheet accordingly.

보증:

SAVVY VALVES는 탁월한 제품 품질과 안심할 수 있는 애프터서비스를 제공하기 위해 최선을 다하고 있습니다. 당사 밸브는 최소 12개월의 서비스 수명을 보장하며, 이 기간 동안 필요한 모든 예비 부품과 자세한 유지보수 지침을 무상으로 제공합니다. 보증 기간 내에 인위적인 손상이 아닌 다른 원인으로 인한 손상이 발생할 경우, 무상으로 부품을 교체하고 전문 기술 지원을 제공합니다. 보증 기간이 만료된 후에는 예비 부품 비용만 지불하시면 되며, 할인된 유지보수 서비스 혜택도 누리실 수 있습니다. 당사의 목표는 신뢰할 수 있는 품질과 포괄적인 애프터서비스를 통해 고객의 운영 비용을 절감하고 생산 효율성을 향상시키는 것입니다. 기술 문의나 유지보수가 필요하시면 언제든지 전문가 팀이 신속하게 대응하여 밸브 시스템이 항상 최적의 성능을 유지하도록 보장합니다.