DN400 PN16 Cast Iron Metal Seated Rising Stem Gate Valve

• Type: Outside Screw and Yoke (OS&Y), Solid Wedge, Flanged Ends
• Seat Type: Metal-to-Metal (Bronze Seated)
• Stem Design: Rising stem (indicates open/close position)
• Operation: Handwheel Operated (Gearbox is mandatory for this size due to high seating torque of metal seals)
• Application: High-temperature fluids, Oils, Steam, Abrasive media, or where rubber is not suitable.

문의하기

설명

Technical Data Sheet

Outside Screw and Yoke (OS&Y) Gate Valve
(Bronze-Seated, Metal-to-Metal Design)

Product Name: OS&Y Solid Wedge Gate Valve (Bronze Seated)
기준: BS5163 / PN16
크기: DN400 (16 inches)

General Design Features

유형: Outside Screw and Yoke (OS&Y), Solid Wedge, Flanged Ends
Seat Type: Metal-to-Metal (Bronze Seated)
스템 디자인: Rising stem (indicates open/close position)
작업: Handwheel Operated (Gearbox is mandatory for this size due to high seating torque of metal seals)
애플리케이션: High-temperature fluids, Oils, Steam, Abrasive media, or where rubber is not suitable.

Applicable Standards

Design & Manufacturing: BS5150 / BS5163 (Metal-seated variants often follow BS5150) / EN1171
Face-to-Face Dimension: EN558-1 Series 3 (or BS2089)
Flange Drilling: BS4504 / EN1092-2 PN16
Test & Inspection: EN12266-1 (Rate A or B depending on spec)

Technical Parameters

Item	Unit	매개변수
Nominal Diameter	mm	DN400 (16″)
Nominal Pressure	PN	16
Working Pressure	MPa	1.6 MPa (16 bar)
Shell Test Pressure	bar	24 bar
Seal Test Pressure (Metal Seat)	bar	17.6 bar (Leakage rate allowed per ISO 5208, Rate D or tighter if specified)
Working Temperature	℃	-10°C ~ +200°C (or higher) *
Suitable Medium	–	Water, Steam, Oils, Gases, High-temp fluids

*Note: Temperature range depends on the specific bronze alloy and gland packing material.

Main Component Materials

요소	Specified Material	Notes / Alternative
몸	Ductile Iron (DI)	Typically GGG-40 or GGG-50
Wedge / Disc	Ductile Iron (DI)	Solid wedge design
Seat Ring (Body)	Bronze	Corrosion-resistant ring pressed or welded into the body.
Seat Ring (Wedge)	Bronze	Critical Difference: Both seating surfaces are Bronze (Body and Wedge) for metal-to-metal sealing.
줄기	Stainless Steel	Typically 2Cr13, SS304, or SS420
Stem Nut	High-strength Brass / Aluminum Bronze	Located in the Yoke
Bonnet	Ductile Iron (DI)	–
Gland Packing	Graphite / PTFE	For high-temperature stem sealing
Handwheel	Cast Iron / Malleable Iron	Must be fitted with a Gearbox for DN400
Coating	Epoxy Resin	Min thickness > 250 microns, Color Blue RAL5005 (or as specified)

Dimensions & Connection Data (DN400 Reference)

*Note: Metal-seated solid wedge valves are often heavier than resilient seated valves. The dimensions below are estimates based on common BS standards. Request certified drawing for exact values. *

Dimension Item	Value (mm)	노트
Face-to-Face Length (L)	Approx. 600 mm	EN558-1 Series 3
Flange Diameter (D)	Approx. 565 mm	BS4504 PN16
Bolt Circle Diameter (PCD)	Approx. 525 mm	–
Number of Bolt Holes	20 – 24	–
Bolt Hole Diameter	Approx. 30 – 33 mm	–
Overall Height (H) (Open)	Approx. 1400 – 1850 mm	Height when valve is fully open
Weight (approx)	Approx. 450 – 550 kg	Metal-seated valves are heavier than resilient-seated ones due to solid wedge mass.

Critical Notes & Selection Tips

“Bronze Seated” Definition:

This data sheet now reflects a true Bronze-to-Bronze seal. The wedge has a Bronze ring/face that mates with the Bronze seat in the body. This is a metal seat, not a resilient seat.

Torque Requirement (Mandatory Gearbox):

Unlike soft-seal valves which rely on rubber compression, metal-seated valves require significant mechanical force to close tightly.
For a DN400 PN16 metal-seated valve, a gearbox (worm gear) is NOT optional – it is mandatory. Please confirm the gearbox ratio with the supplier.

Leakage Rate:

Metal-seated valves cannot achieve “zero leakage” (bubble tight) like rubber-seated valves. They typically conform to ISO 5208 Rate D (0.1x DN mm³/s) or Rate E. Please confirm the acceptable leakage rate for your application.

애플리케이션:

This bronze-on-bronze configuration is excellent for hot water, steam condensate, and some oil services where EPDM or NBR rubber would fail.

Action Required:
Please confirm with the manufacturer:

Gearbox Ratio & Output Torque (Is it suitable for manual operation under max differential pressure?)
Sealing Leakage Rate (ISO 5208 Rate D or better?)
Flange drilling details (BS4504 PN16) to match your pipeline.

보증:

SAVVY VALVES는 탁월한 제품 품질과 안심할 수 있는 애프터서비스를 제공하기 위해 최선을 다하고 있습니다. 당사 밸브는 최소 12개월의 서비스 수명을 보장하며, 이 기간 동안 필요한 모든 예비 부품과 자세한 유지보수 지침을 무상으로 제공합니다. 보증 기간 내에 인위적인 손상이 아닌 다른 원인으로 인한 손상이 발생할 경우, 무상으로 부품을 교체하고 전문 기술 지원을 제공합니다. 보증 기간이 만료된 후에는 예비 부품 비용만 지불하시면 되며, 할인된 유지보수 서비스 혜택도 누리실 수 있습니다. 당사의 목표는 신뢰할 수 있는 품질과 포괄적인 애프터서비스를 통해 고객의 운영 비용을 절감하고 생산 효율성을 향상시키는 것입니다. 기술 문의나 유지보수가 필요하시면 언제든지 전문가 팀이 신속하게 대응하여 밸브 시스템이 항상 최적의 성능을 유지하도록 보장합니다.