6″-150LB-RF A105 Trunnion Ball Valve

Product Technical Data Sheet

Product Name: Flanged Trunnion Ball Valve
Model / Size: 6″ – 150LB – RF / A105 Body / Trunnion Type

1. 일반적인

This product is a split‑body ball valve with flanged ends and a trunnion‑mounted ball design. It features a double‑seat configuration. Suitable for petroleum, natural gas, long‑distance pipelines, storage tanks, and large‑bore piping systems for on‑off service. The trunnion design reduces operating torque and provides reliable sealing for high‑pressure and large‑diameter applications, ensuring long service life.

2. Basic Parameters

3. Design & Manufacturing Standards

4. Main Component Materials

5. Dimensions & Weight

6. Operating Data

7. 특징

1. Trunnion Mounted Ball
   The ball is supported by upper and lower stems, allowing the spring‑loaded or pressure‑energized seats to maintain tight contact with the ball surface. This results in low operating torque and suitability for large diameters and high‑pressure applications.
2. Double Piston Effect & DIB (Optional)
   Seat design can be Single Piston Effect (SPE) or Double Piston Effect (DPE), enabling bidirectional isolation or Double Isolation and Bleed (DIB) functionality.
3. Blow‑out Proof Stem
   The stem is designed with a blow‑out proof construction to ensure safety.
4. Anti‑static Design
   An anti‑static device is provided between the ball and the stem to prevent static electricity accumulation.
5. Emergency Grease Injection
   Grease injection ports are provided at the seat and stem areas for emergency sealing.
6. Double Block & Bleed (DBB)
   When the valve is closed, the body cavity can be vented via the bleed valve, providing Double Block & Bleed (DBB) capability.

8. Ordering Information

Please confirm the following when placing an order:

1. Size (6″) and pressure class (150LB);
2. Body material (A105 / Carbon Steel);
3. Flange standard (ASME B16.5 / ASME B16.47 / HG/T 20615, etc.);
4. Seat material and sealing class (soft‑seated / metal‑seated, leakage rate);
5. Fire‑safe and anti‑static requirements;
6. DIB (Double Isolation & Bleed) requirement;
7. Actuation type (worm gear, pneumatic, electric);
8. Special coating or anti‑corrosion requirements;
9. Body cavity relief and drain port requirements.

보증:

SAVVY VALVES는 탁월한 제품 품질과 안심할 수 있는 애프터서비스를 제공하기 위해 최선을 다하고 있습니다. 당사 밸브는 최소 12개월의 서비스 수명을 보장하며, 이 기간 동안 필요한 모든 예비 부품과 자세한 유지보수 지침을 무상으로 제공합니다. 보증 기간 내에 인위적인 손상이 아닌 다른 원인으로 인한 손상이 발생할 경우, 무상으로 부품을 교체하고 전문 기술 지원을 제공합니다. 보증 기간이 만료된 후에는 예비 부품 비용만 지불하시면 되며, 할인된 유지보수 서비스 혜택도 누리실 수 있습니다. 당사의 목표는 신뢰할 수 있는 품질과 포괄적인 애프터서비스를 통해 고객의 운영 비용을 절감하고 생산 효율성을 향상시키는 것입니다. 기술 문의나 유지보수가 필요하시면 언제든지 전문가 팀이 신속하게 대응하여 밸브 시스템이 항상 최적의 성능을 유지하도록 보장합니다.