2″-1500LB Closed Die Forged Steel Gate Valve

Design Standard API 602 / ASME B16.34
Nominal Size 2 inch (DN50)
Pressure Class Class 1500 LB (PN250)
Bonnet Type OS&Y (Outside Screw and Yoke)
Connection Type Welding Ends (Socket Weld SW / Butt Weld BW)
Operation Handwheel

문의하기

설명

API 602 Forged Steel Gate Valve Technical Data Sheet

General Information

Item	사양
밸브 유형	Forged Steel Gate Valve
Design Standard	API 602 / ASME B16.34
공칭 크기	2 inch (DN50)
Pressure Class	Class 1500 LB (PN250)
Bonnet Type	OS&Y (Outside Screw and Yoke)
Connection Type	Welding Ends (Socket Weld SW / Butt Weld BW)
작업	Handwheel

Applicable Standards

Item	Standard Code
Design & Manufacturing	API 602, ASME B16.34
End Connections	ASME B16.11 (Socket Weld), ASME B16.25 (Butt Weld)
Face-to-Face / End-to-End	ASME B16.10
Test & Inspection	API 598
Pressure-Temperature Rating	ASME B16.34

Main Design Features

Body & Bonnet: Die-forged construction, dense structure, high strength.
Stem Design: Backseat feature allows packing replacement under pressure when valve is fully open.
Wedge: Solid wedge, fully guided design to minimize wear.
Bonnet Type: Bolted bonnet or welded bonnet (as required).
Seat Design: Metal-to-metal seating (typically 13Cr/STL), renewable or welded-in seat rings.
Gasket: Flexible graphite or spiral wound gasket with stainless steel winding.

Main Component Materials

Item	Part Name	재료	Standard/Remark
1	몸	ASTM A105N	Forged steel, suitable for NACE MR0175
2	Bonnet	ASTM A105N	Forged steel
3	Wedge	ASTM A276 410 / 304+STL	13Cr or stainless steel with hardfacing
4	Seat Ring	A105N + STL / A276 420	Integral hardfacing or renewable
5	줄기	ASTM A182 F6a (13Cr) / A182 F304	Stainless steel
6	Gasket	304 + Flexible Graphite	Spiral wound or serrated
7	Packing	Flexible Graphite	Pre-compressed rings, leak-proof
8	Bonnet Bolt	ASTM A193 Gr.B7	Alloy steel
9	Bonnet Nut	ASTM A194 Gr.2H	Heavy hex nut
10	Gland Flange	ASTM A105	Carbon steel
11	Handwheel	Malleable Cast Iron (ASTM A197)

Technical Parameters & Dimensions

5.1 Pressure-Temperature Ratings

Material Group: Group 1.1 (Carbon Steel)
온도 범위: -29°C ~ 425°C
Applicable Media: Water, oil, gas, steam, etc.

5.2 Dimensions (Reference Values)

Dimension	Value	Remark
End-to-End Length (L)	368 mm (14.5 inch)	For both SW and BW ends, per ASME B16.10
Height (H-OPEN)	Approx. 508 mm	Fully open position
Handwheel Diameter (W)	Approx. 300 mm
Weight	Approx. 40 kg	Reference only, may vary by manufacturer

5.3 End Connection Details

Socket Weld (SW): Bore diameter and depth per ASME B16.11.
맞대기 용접(BW): Bevel preparation per ASME B16.25.

Test & Inspection (API 598)

Shell Test Pressure: 23.4 MPa (hydrostatic)
High-Pressure Seat Test: 17.0 MPa (hydrostatic or pneumatic)
Low-Pressure Seat Test: 0.5 – 0.7 MPa (air)
Test Duration & Procedure: Strictly in accordance with API 598.

Marking & Supply

Valve Marking: Per MSS SP-25, nameplate to include material, pressure, heat number, etc.
Cleaning & Protection: Valves internally and externally cleaned, ends covered with protectors, flange faces coated with rust preventive (if applicable).
Documentation: Material certificates, pressure test reports, declaration of conformity provided with shipment.

보증:

SAVVY VALVES는 탁월한 제품 품질과 안심할 수 있는 애프터서비스를 제공하기 위해 최선을 다하고 있습니다. 당사 밸브는 최소 12개월의 서비스 수명을 보장하며, 이 기간 동안 필요한 모든 예비 부품과 자세한 유지보수 지침을 무상으로 제공합니다. 보증 기간 내에 인위적인 손상이 아닌 다른 원인으로 인한 손상이 발생할 경우, 무상으로 부품을 교체하고 전문 기술 지원을 제공합니다. 보증 기간이 만료된 후에는 예비 부품 비용만 지불하시면 되며, 할인된 유지보수 서비스 혜택도 누리실 수 있습니다. 당사의 목표는 신뢰할 수 있는 품질과 포괄적인 애프터서비스를 통해 고객의 운영 비용을 절감하고 생산 효율성을 향상시키는 것입니다. 기술 문의나 유지보수가 필요하시면 언제든지 전문가 팀이 신속하게 대응하여 밸브 시스템이 항상 최적의 성능을 유지하도록 보장합니다.