Standard Y Strainer

Product Type Y-Type Pipeline Strainer (T-Type / Angle Pattern)
Body Material Ductile Iron (ASTM A536, 65-45-12 / GGG-50)
Filter Element Material Stainless Steel (SS304 / SS316) Perforated or Wire Mesh
Connection Type Flanged Ends
Size Range DN50 ~ DN300 (2″ ~ 12″)
Pressure Rating PN10 / PN16 / Class 125 / Class 150

문의하기

설명

Technical Data Sheet

Y-Type Strainer – Flanged – Ductile Iron – Stainless Steel Mesh

Product Name: Flanged Y-Type Strainer

General Information

Item	사양
Product Type	Y-Type Pipeline Strainer (T-Type / Angle Pattern)
본체 재질	Ductile Iron (ASTM A536, 65-45-12 / GGG-50)
Filter Element Material	Stainless Steel (SS304 / SS316) Perforated or Wire Mesh
Connection Type	Flanged Ends
Size Range	DN50 ~ DN300 (2″ ~ 12″)
압력 등급	PN10 / PN16 / Class 125 / Class 150
애플리케이션	Water, Wastewater, Oil, Gas, and General Industrial Pipelines
작업	Continuous filtration with periodic blow-off

Design Standards & Specifications

Item	기준
Design & Manufacturing	GB/T 14382, MSS SP-70, BS 5152
Face-to-Face Dimensions	Manufacturer’s standard (short or long pattern)
Flange Dimensions	ASME B16.5 (Class 150), EN 1092-2 (PN10/16), or GB/T 17241.6
Pressure Testing	API 598 / EN 12266-1
Screen Perforation	GB/T 5330 or ISO 4783

Main Component Materials

Part Name	Material Specification	비고
몸	Ductile Iron (GGG-50 / 65-45-12)	Fusion bonded epoxy coated (FBE) or painted
Cover / Bonnet	Ductile Iron (GGG-50)	Includes gasket seal
Filter Screen (Mesh)	Stainless Steel SS304 / SS316	Perforated or woven wire mesh
Gasket	Compressed Non-Asbestos Fiber (CNAF) / PTFE	Between body and cover
Drain / Blow-off Plug	Carbon Steel / Stainless Steel	At bottom of strainer for cleaning
Boltwork	Carbon Steel Zinc Plated / Stainless Steel	Cover bolts

Filter Mesh Specifications

Item	Standard Option	Fine Filtration Option
Screen Type	Perforated Stainless Steel	Woven Stainless Steel Wire Mesh
Mesh Size / Perforation	1.0 mm – 3.0 mm diameter holes	10 mesh – 100 mesh (as required)
Open Area Ratio	≥ 50%	≥ 40%
Material Grade	SS304 / SS316	SS304 / SS316
Retention Rating	Coarse (800–3000 microns)	Medium to Fine (150–2000 microns)

Technical Parameters & Dimensions (Reference)

Flange Drilling: PN16 / Class 150

Nominal Size (DN)	Length (L) mm	Height (H) mm	Flange O/D (D) mm	Bolt Circle (D1) mm	Flange Thickness (t) mm	No. of Bolt Holes	Weight (kg)
DN50 (2″)	230	140	165	125	19	4	8
DN65 (2.5″)	290	165	185	145	19	4	11
DN80 (3″)	310	175	200	160	20	8	14
DN100 (4″)	350	215	220	180	20	8	20
DN125 (5″)	400	245	250	210	22	8	27
DN150 (6″)	480	280	285	240	22	8	35
DN200 (8″)	600	350	340	295	24	12	55
DN250 (10″)	730	430	405	355	26	12	80
DN300 (12″)	850	510	460	410	26	12	110

Note: Dimensions are for reference only. Actual dimensions may vary by manufacturer.

Testing & Inspection

Test Item	Test Pressure (PN16)	Acceptance Criteria
Shell Hydrostatic Test	1.5 × PN = 24 bar	No visible leakage, no structural damage
Seat / Body Seal Test	1.1 × PN = 17.6 bar	No leakage through cover gasket or drain plug
Air Test (Optional)	0.6 bar (6 bar optional)	Soap bubble test for leak detection
Screen Integrity	Visual / Pass	No tears, correct mesh size installed

Features & Options

Ductile Iron Body: Higher strength and impact resistance compared to gray cast iron.
Stainless Steel Screen: Corrosion-resistant, easy to clean, and replaceable.
Flanged Connections: Easy installation and removal from pipeline.
Bottom Drain / Blow-off Connection: Allows purging of debris without removing the screen (threaded plug or flanged outlet optional).
코팅: Fusion Bonded Epoxy (FBE) or solvent-free epoxy for corrosion protection (optional).
Screen Options:

Perforated screen (standard for coarse filtration).
Wire mesh lined screen (for finer filtration).
Dual-element screens available upon request.

Magnetic Insert: Optional magnetic rod to capture ferrous particles.

Installation & Maintenance Notes

Install with the screen chamber pointing vertically downward for easy cleaning.
Flow direction must match the arrow on the body.
Provide adequate space below the strainer for screen removal.
Regularly open the blow-off valve or remove the screen for cleaning, depending on the debris load.
Check gasket condition during screen maintenance and replace if necessary.

Note: This data sheet provides general specifications. For specific projects, please refer to the manufacturer’s final drawings and parameters.

보증:

SAVVY VALVES는 탁월한 제품 품질과 안심할 수 있는 애프터서비스를 제공하기 위해 최선을 다하고 있습니다. 당사 밸브는 최소 12개월의 서비스 수명을 보장하며, 이 기간 동안 필요한 모든 예비 부품과 자세한 유지보수 지침을 무상으로 제공합니다. 보증 기간 내에 인위적인 손상이 아닌 다른 원인으로 인한 손상이 발생할 경우, 무상으로 부품을 교체하고 전문 기술 지원을 제공합니다. 보증 기간이 만료된 후에는 예비 부품 비용만 지불하시면 되며, 할인된 유지보수 서비스 혜택도 누리실 수 있습니다. 당사의 목표는 신뢰할 수 있는 품질과 포괄적인 애프터서비스를 통해 고객의 운영 비용을 절감하고 생산 효율성을 향상시키는 것입니다. 기술 문의나 유지보수가 필요하시면 언제든지 전문가 팀이 신속하게 대응하여 밸브 시스템이 항상 최적의 성능을 유지하도록 보장합니다.