DN500-PN10 Cast Iron Metal Seated Rising Stem Gate Valve

• Type: Outside Screw and Yoke (OS&Y), Solid Wedge, Flanged Ends
• Design Standard: DIN 3352
• Face-to-Face Standard: DIN 3202 F4
• Seat Type: Metal-to-Metal (Bronze Seated)

문의하기

설명

Technical Data Sheet

Outside Screw and Yoke (OS&Y) Gate Valve
(Bronze-Seated, Metal-to-Metal Design)

Product Name: OS&Y Solid Wedge Gate Valve (Bronze Seated)
기준: DIN 3352
크기: DN500 (20 inches)
Pressure: PN10

General Design Features

유형: Outside Screw and Yoke (OS&Y), Solid Wedge, Flanged Ends
설계 표준: DIN 3352
Face-to-Face Standard: DIN 3202 F4
Seat Type: Metal-to-Metal (Bronze Seated)
스템 디자인: Rising stem (indicates open/close position)
작업: Handwheel Operated (Gearbox is mandatory for DN500 metal-seated valves due to high seating torque)
애플리케이션: High-temperature fluids, Oils, Steam, Abrasive media, or where rubber is not suitable.

Applicable Standards

Design & Manufacturing: DIN 3352 (Part 1 & applicable parts)
Face-to-Face Dimension: DIN 3202 F4 (Short pattern)
Flange Drilling: DIN 2501 / EN 1092-2 PN10
Test & Inspection: EN 12266-1 (formerly DIN 3230)

Technical Parameters

Item	Unit	매개변수
Nominal Diameter	mm	DN500 (20″)
Nominal Pressure	PN	10
Working Pressure	bar	10 bar (1.0 MPa)
Shell Test Pressure	bar	15 bar (1.5 x PN)
Seal Test Pressure (Metal Seat)	bar	11 bar (1.1 x PN)
Working Temperature	℃	-10°C ~ +200°C (or higher) *
Suitable Medium	–	Water, Steam, Oils, Gases, High-temp fluids

*Note: Temperature range depends on the specific bronze alloy and gland packing material.

Main Component Materials

요소	Specified Material	Notes / Alternative
몸	Ductile Iron (DI)	GGG-40 or GGG-50 (EN-JS 1030/1050)
Wedge / Disc	Ductile Iron (DI)	Solid wedge design
Seat Ring (Body)	Bronze	Corrosion-resistant ring pressed or welded into the body.
Seat Ring (Wedge)	Bronze	Both seating surfaces are Bronze for metal-to-metal sealing.
줄기	Stainless Steel	Typically 2Cr13, X20Cr13, or SS304/SS420
Stem Nut	High-strength Brass / Aluminum Bronze	Located in the Yoke
Bonnet	Ductile Iron (DI)	GGG-40 or GGG-50
Gland Packing	Graphite / PTFE	For high-temperature stem sealing
Handwheel	Cast Iron / Malleable Iron	Must be fitted with a Gearbox for DN500
Coating	Epoxy Resin (Fusion Bonded)	Min thickness > 250 microns, Color Blue RAL5005 (or as specified)

Dimensions & Connection Data (DN500 PN10 Reference)

*Note: Dimensions based on DIN standards. Request certified drawing for exact values. *

Dimension Item	Value (mm)	노트
Face-to-Face Length (L)	350 mm	DIN 3202 F4 (Short pattern)
Flange Diameter (D)	670 mm	DIN 2501 / EN 1092-2 PN10
Bolt Circle Diameter (PCD/K)	620 mm	DIN 2501 PN10 Standard
Number of Bolt Holes	20	Typically 20 holes for DN500 PN10
Bolt Hole Diameter (d0)	26 mm	For M24 bolts (approx)
Overall Height (H) (Open)	Approx. 1600 – 2000 mm	Height from centerline to top of handwheel (open position). Varies by manufacturer.
Weight (approx)	Approx. 550 – 700 kg	Metal-seated valves are heavier. Confirm with supplier.

Critical Notes & Selection Tips

“Bronze Seated” Definition:

This data sheet reflects a true Bronze-to-Bronze seal. The wedge has a Bronze ring/face that mates with the Bronze seat in the body.

Torque Requirement (Mandatory Gearbox):

For a DN500 PN10 metal-seated valve, a gearbox (worm gear) is NOT optional – it is mandatory. The solid wedge and metal-to-metal contact create very high seating and unseating torque. Please confirm the gearbox ratio with the supplier.

Leakage Rate:

Metal-seated valves cannot achieve “zero leakage” (bubble tight) like resilient-seated valves. They typically conform to ISO 5208 Rate D (0.1x DN mm³/s) or Rate E. Please confirm the acceptable leakage rate for your application.

DIN 3352 Structure:

DIN 3352 is a multi-part standard. Your valve most likely conforms to DIN 3352 Part 4 or Part 5 for cast iron gate valves, or a specific metal-seated variant.

Action Required:
Please confirm with the manufacturer:

Gearbox Ratio & Output Torque (Is it suitable for manual operation under max differential pressure?)
Sealing Leakage Rate (ISO 5208 Rate D or better?)
Flange drilling details (DIN 2501 PN10) to match your pipeline.

보증:

SAVVY VALVES는 탁월한 제품 품질과 안심할 수 있는 애프터서비스를 제공하기 위해 최선을 다하고 있습니다. 당사 밸브는 최소 12개월의 서비스 수명을 보장하며, 이 기간 동안 필요한 모든 예비 부품과 자세한 유지보수 지침을 무상으로 제공합니다. 보증 기간 내에 인위적인 손상이 아닌 다른 원인으로 인한 손상이 발생할 경우, 무상으로 부품을 교체하고 전문 기술 지원을 제공합니다. 보증 기간이 만료된 후에는 예비 부품 비용만 지불하시면 되며, 할인된 유지보수 서비스 혜택도 누리실 수 있습니다. 당사의 목표는 신뢰할 수 있는 품질과 포괄적인 애프터서비스를 통해 고객의 운영 비용을 절감하고 생산 효율성을 향상시키는 것입니다. 기술 문의나 유지보수가 필요하시면 언제든지 전문가 팀이 신속하게 대응하여 밸브 시스템이 항상 최적의 성능을 유지하도록 보장합니다.