DN50-PN40-RF Axial Check Valve

Nominal Diameter (DN) 50 mm
Nominal Pressure (PN) 40 bar
Connection Type RF (Raised Face Flange)
Design Type Axial, Spring-Assisted
Applicable Media Water, Oil, Steam, Gas, etc.
Media Temperature Range -20°C ~ +200°C
Body Material Carbon Steel WCB / Stainless Steel 304 / 316
Disc Material SS 304/316 + Stellite hard-faced sealing
Seat Seal Metal Hard Seal / Soft Seal (PTFE)
Spring Material SS 316 / Inconel X-750
Flange Standard EN 1092-1 (PN40) / ASME B16.5 (Class 300)
Cracking Pressure ≤ 0.1 bar
Full Flow Pressure Drop ≤ 0.02 bar

문의하기

TECHNICAL DATA SHEET

Product: DN50-PN40-RF Axial Check Valve

PRODUCT DESCRIPTION

The axial check valve (also known as axial flow check valve) is designed for minimal flow resistance and pulsation reduction. Featuring an axial flow path and spring-assisted closing mechanism, it is suitable for pipeline systems requiring low water hammer, minimal pressure drop, and tight sealing. Suitable for horizontal or vertical installation (flow direction must be observed).

KEY TECHNICAL PARAMETERS

Item	사양	비고
공칭 직경(DN)	50 mm	2 inch
Nominal Pressure (PN)	40 bar	Approx. Class 300
Connection Type	RF (Raised Face Flange)	Per EN 1092-1 / ASME B16.5
Design Type	Axial, Spring-Assisted	Disc moves parallel to pipeline axis
Applicable Media	Water, Oil, Steam, Gas, etc.	Dependent on seat material
Media Temperature Range	-20°C ~ +200°C	High-temp version available up to +400°C
본체 재질	Carbon Steel WCB / Stainless Steel 304 / 316	Duplex steel etc. optional
Disc Material	SS 304/316 + Stellite hard-faced sealing
Seat Seal	Metal Hard Seal / Soft Seal (PTFE)	Optional
Spring Material	SS 316 / Inconel X-750	Selected per media temperature
Flange Standard	EN 1092-1 (PN40) / ASME B16.5 (Class 300)	Other standards available upon request
Cracking Pressure	≤ 0.1 bar	Low differential pressure required to open
Full Flow Pressure Drop	≤ 0.02 bar	Typical value, depends on flow velocity

DIMENSIONS & CONNECTIONS (Typical)

Dimension	Value (mm)
Face-to-Face Length L	Approx. 200-250
Overall Height H	Approx. 150-180
Flange OD D	165
Bolt Circle Diameter K	125
Bolt Holes (Number × Diameter)	4 × φ18
Flange Thickness t	Approx. 24
Flange Face	RF (Raised Face) Ra≤3.2μm
Weight (WCB)	Approx. 12-15 kg

PERFORMANCE CHARACTERISTICS

Low Flow Resistance: Axial streamlined flow path, lower pressure drop compared to conventional swing or lift check valves.
Rapid Closing: Spring-assisted closure minimizes reverse flow and water hammer.
Reliable Sealing: Metal hard seal for high temperature/pressure; soft seal option for bubble-tight shut-off.
Flexible Installation: Suitable for horizontal or vertical mounting (arrow must point upward or horizontally in flow direction).
Easy Maintenance: Most designs allow in-line maintenance without removing from pipeline.

TYPICAL APPLICATIONS

Petrochemical: Pump discharge, compressor pipelines.
Power Industry: Feedwater systems, condensate lines.
Water Supply: High-pressure pump discharge, network backflow prevention.
Industrial Processes: Steam lines, cooling systems.

TESTING & CERTIFICATION

Test Item	기준	Requirement
Shell Strength Test	EN 12266 / API 598	1.5 × PN (60 bar)
Seat Leakage Test	EN 12266 / API 598	1.1 × PN (44 bar)
Reverse Flow Seal Test	As per customer request	Gas or liquid test available
Material Certificate	EN 10204 3.1	Optional

INSTALLATION & MAINTENANCE NOTES

Verify valve flow direction arrow matches medium flow direction before installation.
Recommended to install a strainer upstream to prevent seal damage from debris.
For vertical installation, ensure spring is below the disc (refer to specific design drawing).
Periodically check for smooth operation and abnormal vibration/noise.

ORDERING EXAMPLE

DN50-PN40-RF Axial Check Valve, Body WCB, Disc/Seat 304+Stellite, Spring 316, Metal Hard Seal, EN 1092-1 Flange.

Note: The above data represents typical design values. Actual product specifications may vary depending on specific design, material selection, or manufacturing standards. Please confirm detailed specifications with the manufacturer before ordering.

보증:

SAVVY VALVES는 탁월한 제품 품질과 안심할 수 있는 애프터서비스를 제공하기 위해 최선을 다하고 있습니다. 당사 밸브는 최소 12개월의 서비스 수명을 보장하며, 이 기간 동안 필요한 모든 예비 부품과 자세한 유지보수 지침을 무상으로 제공합니다. 보증 기간 내에 인위적인 손상이 아닌 다른 원인으로 인한 손상이 발생할 경우, 무상으로 부품을 교체하고 전문 기술 지원을 제공합니다. 보증 기간이 만료된 후에는 예비 부품 비용만 지불하시면 되며, 할인된 유지보수 서비스 혜택도 누리실 수 있습니다. 당사의 목표는 신뢰할 수 있는 품질과 포괄적인 애프터서비스를 통해 고객의 운영 비용을 절감하고 생산 효율성을 향상시키는 것입니다. 기술 문의나 유지보수가 필요하시면 언제든지 전문가 팀이 신속하게 대응하여 밸브 시스템이 항상 최적의 성능을 유지하도록 보장합니다.