1/2″-800LB Close Die Forged Lift Check Valve

Valve Type Lift Check Valve
Design Standard API 602 / ASME B16.34 / BS 5352
Nominal Size 1/2 inch (DN15)
Pressure Class Class 800 LB (PN130)
Structure Type Lift Type, Bolted Bonnet
Connection Type NPT Threaded (ASME B1.20.1) or Socket Weld (ASME B16.11)
Installation Horizontal Piping
Body Material ASTM A105N (Forged Carbon Steel)

문의하기

설명

API 602 Forged Steel Lift Check Valve Technical Data Sheet

A105N Material 1/2″ 800LB NPT/Welded Ends

General Information

Item	사양
밸브 유형	Lift Check Valve
Design Standard	API 602 / ASME B16.34 / BS 5352
공칭 크기	1/2 inch (DN15)
Pressure Class	Class 800 LB (PN130)
Structure Type	Lift Type, Bolted Bonnet
Connection Type	NPT Threaded (ASME B1.20.1) or Socket Weld (ASME B16.11)
Installation	Horizontal Piping
본체 재질	ASTM A105N (Forged Carbon Steel)

Applicable Standards

Item	Standard Code
Design & Manufacturing	API 602, ASME B16.34, BS 5352
Face-to-Face / End-to-End	Manufacturer Standard / ASME B16.10
Socket Weld Ends	ASME B16.11
Threaded Ends	ASME B1.20.1 (NPT)
Test & Inspection	API 598
Pressure-Temperature Rating	ASME B16.34
Valve Marking	MSS SP-25

Main Design Features

Operating Principle: Automatically opens and closes the disc by medium flow. When medium flows in the specified direction, disc opens under medium pressure. When backflow occurs, disc closes against seat to prevent reverse flow
Disc Structure: Disc moves vertically along the body centerline, reliable operation, suitable for small bore applications
차체 구조: One-piece die forged body, dense structure, high strength, no casting defects
Bonnet Connection: Bolted bonnet design with stainless steel/flexible graphite spiral wound gasket sealing
Sealing Surface: Hardfaced with alloy steel or carbide, reasonable material pairing, long service life
Installation Requirement: Suitable for horizontal pipelines only, disc closes by gravity

Main Component Materials (A105N Material)

Item	Part Name	재료	Standard/Remark
1	몸	ASTM A105N	Forged Carbon Steel, suitable for NACE MR0175
2	Bonnet	ASTM A105N	Forged Carbon Steel
3	디스크	ASTM A276 410 / A105N+STL	13Cr Stainless Steel or Hardfaced
4	좌석	Integral / STL Hardfaced	Machined directly on body or hardfaced
5	Gasket	304 + Flexible Graphite	Spiral Wound
6	Stud Bolt	ASTM A193 Gr.B7	Alloy Steel
7	Hex Nut	ASTM A194 Gr.2H	Heavy Hex Nut

Technical Parameters & Dimensions

5.1 Pressure-Temperature Ratings

Item	매개변수
Nominal Pressure	Class 800 LB (PN130)
Shell Test Pressure	207 bar (3000 PSI)
Seat Test Pressure	152 bar (2200 PSI)
Low-Pressure Pneumatic Test	5 – 7 bar (Air)
온도 범위	-29°C ~ 425°C
Applicable Media	Water, steam, oil, etc.

5.2 Dimensions (1/2″ Class 800)

Dimension	Value	Remark
End-to-End Length (L)	73 mm	Socket Weld/Threaded ends, per Sant Valves data
Height (H)	Approx. 53 mm	Reference value
Socket Weld Bore (A)	10 mm	Min. socket weld depth
Socket Weld Dia (B)	21.8 – 22.2 mm	Socket weld bore range
Threaded End	1/2″ NPT	Per ASME B1.20.1
Weight	Approx. 1.0 kg	Reference value, may vary by manufacturer

5.3 End Connection Details

NPT Threaded Ends: Per ASME B1.20.1, 1/2 inch American Standard Taper Pipe Thread
Socket Weld Ends (SW): Per ASME B16.11, bore diameter and depth conforming to standard
Flow Direction: Clear flow direction arrow marking on body

Test & Inspection (API 598)

Test Item	Test Pressure	Medium	Acceptance Criteria
Shell Test	207 bar (Hydrostatic)	Water	No visible leakage
High-Pressure Seat Test	152 bar (Hydrostatic)	Water	No visible leakage
Low-Pressure Seat Test	5 – 7 bar (Air)	Air	No bubbles leakage
Test Duration	Per API 598	—	Hold time conforms to standard

Marking & Supply

Valve Marking: Per MSS SP-25, nameplate to include nominal size, pressure class, material, heat number, design standard, etc.
Flow Direction: Clear flow direction arrow marking on body
Cleaning & Protection: Valves internally and externally cleaned, ends covered with protectors, threaded or weld ends coated with rust preventive
Documentation: Material certificates, pressure test reports, declaration of conformity provided with shipment

보증:

SAVVY VALVES는 탁월한 제품 품질과 안심할 수 있는 애프터서비스를 제공하기 위해 최선을 다하고 있습니다. 당사 밸브는 최소 12개월의 서비스 수명을 보장하며, 이 기간 동안 필요한 모든 예비 부품과 자세한 유지보수 지침을 무상으로 제공합니다. 보증 기간 내에 인위적인 손상이 아닌 다른 원인으로 인한 손상이 발생할 경우, 무상으로 부품을 교체하고 전문 기술 지원을 제공합니다. 보증 기간이 만료된 후에는 예비 부품 비용만 지불하시면 되며, 할인된 유지보수 서비스 혜택도 누리실 수 있습니다. 당사의 목표는 신뢰할 수 있는 품질과 포괄적인 애프터서비스를 통해 고객의 운영 비용을 절감하고 생산 효율성을 향상시키는 것입니다. 기술 문의나 유지보수가 필요하시면 언제든지 전문가 팀이 신속하게 대응하여 밸브 시스템이 항상 최적의 성능을 유지하도록 보장합니다.