Burried Coal Tar Coated U section High Performance Butterfly Valve 60″

Valve Type Double Eccentric Butterfly Valve (High Performance)
Application Buried Service / Underground Installation
Size 60 inches (DN 1500)
Pressure Rating Class 150LB (200psi)
Connection Type Flanged Ends (ASME B16.47 Series A or B as required)
Operation Electric Actuator with Extended Stem for buried service

문의하기

설명

Technical Data Sheet

Buried Butterfly Valve – Double Eccentric – Electric Actuator

Product Name: Buried Double Eccentric Butterfly Valve

General Information

Item	사양
밸브 유형	Double Eccentric Butterfly Valve (High Performance)
애플리케이션	Buried Service / Underground Installation
크기	60 inches (DN 1500)
압력 등급	Class 150LB (200psi)
Connection Type	Flanged Ends (ASME B16.47 Series A or B as required)
작업	Electric Actuator with Extended Stem for buried service

Design Standards & Specifications

Item	기준
Design & Manufacturing	API 609 (Category B), ASME B16.34
Face-to-Face Dimensions	API 609, ASME B16.10
Flange Dimensions	ASME B16.47 (Series A / MSS SP-44 or Series B / API 605)
Pressure Testing	API 598
Coating Standard (Buried)	GB/T 17459 or AWWA C210 (Coal Tar Epoxy)
Actuator Mounting	ISO 5211

Main Component Materials

Part Name	Material Specification
몸	Ductile Iron ASTM A536, 60-40-18 / GGG40
디스크	Ductile Iron / Stainless Steel (Optional)
Seat (Seal)	EPDM (Ethylene Propylene Diene Monomer) – Suitable for Water/Wastewater
Shaft / Stem	Stainless Steel 410 / 17-4PH (Extended Stem for burial)
Bushings	Self-Lubricating Bronze / PTFE Lined
Body O-Rings	Buna-N / EPDM
Boltwork	ASTM A193 B7 / A194 2H (Zinc Plated)
External Coating	Coal Tar Epoxy (Thick coating for buried service)

Technical Parameters & Dimensions (Reference)

Coating Specification:

기준: Coal Tar Epoxy conforming to AWWA C210 or GB/T 17459 .
Color: Black
Dry Film Thickness: > 300 Microns (or as required for buried service)
Feature: High electrical resistance, anti-corrosive, and resistant to soil chemicals.

Valve Dimensions (Approximate values for 60″ / DN1500):

Dimension	Value (Approx.)	노트
Face-to-Face (L)	600 mm – 800 mm	Dependent on API 609 Cat. B design
Flange O/D (D)	1380 mm – 1480 mm	ASME B16.47 Series A
Bolt Circle (D1)	1330 mm – 1430 mm	Dependent on flange standard
Number of Bolt Holes	48 – 56	/
Valve Height (w/o operator)	Custom	Dependent on extended stem length
Extended Stem Length	As per burial depth	Typically 2m, 3m, or as specified

Electric Actuator Specifications

Item	Requirement
Actuator Type	Heavy-duty Electric, Quarter-turn (90°)
Power Supply	380V AC / 50Hz / 3-Phase (or as specified)
Torque	≥ 1.5 x Required Valve Break Torque
Protection Class	IP68 (Watertight for buried applications)
Duty Cycle	S2 / S4 (Intermittent)
Motor Insulation	Class H / F
Manual Override	Handwheel with declutch mechanism
Limit Switch	Fully adjustable (Open/Close)
Control Type	On-Off / Modulating (4-20mA) as required

테스트

Shell Test: 1.5 x Rated Pressure
Seat Test: 1.1 x Rated Pressure (Bi-directional)
Leakage Rate: Zero Leakage (API 598)

Technical Notes:

Double Eccentric Design: The shaft is offset from both the centerline of the disc and the body, reducing seat wear during operation.
Extended Stem: Allows the actuator to be positioned above ground while the valve body remains buried. The stem extension is sealed to prevent ingress of moisture and soil.
Buried Coating: The coal tar epoxy provides a durable barrier against galvanic corrosion and soil stress .

보증:

SAVVY VALVES는 탁월한 제품 품질과 안심할 수 있는 애프터서비스를 제공하기 위해 최선을 다하고 있습니다. 당사 밸브는 최소 12개월의 서비스 수명을 보장하며, 이 기간 동안 필요한 모든 예비 부품과 자세한 유지보수 지침을 무상으로 제공합니다. 보증 기간 내에 인위적인 손상이 아닌 다른 원인으로 인한 손상이 발생할 경우, 무상으로 부품을 교체하고 전문 기술 지원을 제공합니다. 보증 기간이 만료된 후에는 예비 부품 비용만 지불하시면 되며, 할인된 유지보수 서비스 혜택도 누리실 수 있습니다. 당사의 목표는 신뢰할 수 있는 품질과 포괄적인 애프터서비스를 통해 고객의 운영 비용을 절감하고 생산 효율성을 향상시키는 것입니다. 기술 문의나 유지보수가 필요하시면 언제든지 전문가 팀이 신속하게 대응하여 밸브 시스템이 항상 최적의 성능을 유지하도록 보장합니다.