Motorized Triple offset Double Flange Butterfly Valve

Valve Type Triple Offset Butterfly Valve
Nominal Size DN200 (8 Inch) or as specified
Pressure Rating Class 150 (PN20) or Class 300 / PN optional
End Connection Double Flange (to ASME B16.5 or EN 1092-1)
Operation Motorized Actuator

문의하기

Motorized Triple Offset Double Flange Butterfly Valve

Technical Data Sheet
(Typical Size: DN200 / Class 150 – can be customized)

General Information

Item	설명
밸브 유형	Triple Offset Butterfly Valve
공칭 크기	DN200 (8 Inch) or as specified
압력 등급	Class 150 (PN20) or Class 300 / PN optional
End Connection	Double Flange (to ASME B16.5 or EN 1092-1)
작업	모터화된 액추에이터
애플리케이션	Bi-directional tight shut-off, frequent operation, high temperature / high pressure / corrosive media, steam, oil, natural gas, etc.

Design & Manufacturing Standards

기준	설명
Design Code	API 609 (Category B – Triple Offset)
Flange Dimensions	ASME B16.5 Class 150 / 300 or EN 1092-1 PN10/PN16/PN25/PN40
Face-to-Face Dimension	API 609 (short or long pattern) or EN 558 Series 13 / 14
Pressure-Temperature Rating	ASME B16.34
Top Flange	ISO 5211 (for direct actuator mounting)
Inspection & Testing	API 598
Leakage Rate	API 598 Rate A / ISO 5208 Rate A (Zero leakage)
Fire Safe Design	API 607 / ISO 10497 (optional)

Main Materials (Typical – can be customized)

요소	Standard Material	Optional Materials
몸	Carbon Steel (WCB)	Stainless Steel CF8M, CF3M, Duplex SS, Alloy Steel
디스크	Stainless Steel CF8M	Duplex SS, Hastelloy, Nickel-Aluminum Bronze
줄기	17-4PH Precipitation Hardening SS	Inconel, Monel, Duplex SS
Seat Sealing Surface	Stellite hardfacing	Nickel-based alloy, Tungsten Carbide
Seal Ring	Multi-layer metal + graphite	All-metal seal, PTFE (low temperature)
Packing	Flexible graphite + SS spacer rings	PTFE + graphite, low emission packing
Fasteners	Stainless Steel A193 B8	Alloy Steel B7
Gaskets	Flexible graphite + SS spiral wound	Metal ring gasket

Outline Dimensions & Weight (Typical – DN200 Class 150)

Dimension Parameter	Value (Short pattern, API 609)
Face-to-Face Length L	Approx. 152 mm (DN200 Class 150 short)
Flange Outer Diameter D	Approx. 345 mm (ASME B16.5 Class 150)
Bolt Circle Diameter K	Approx. 298 mm
Flange Thickness C	Approx. 29 mm
Number / Diameter of Bolt Holes	12 × 25 mm
Center Height (flange face to center)	Approx. 108 mm
Overall Height (excluding actuator) H	Approx. 450 mm
Valve Weight (excluding actuator)	Approx. 85 kg
Electric Actuator Weight (reference)	Approx. 25 – 50 kg (depending on torque and brand)

Dimensions above are typical references. Final dimensions to be confirmed with manufacturer’s drawing.

Pressure-Temperature Rating (ASME B16.34 – WCB body)

Temperature (°C)	Max. Working Pressure (bar) – Class 150	Max. Working Pressure (bar) – Class 300
-29 ~ 38	19.6	51.1
100	17.6	46.6
150	15.3	44.8
200	13.2	41.9
250	11.2	39.5
300	9.2	37.1
350	7.5	34.1
400	5.5	30.2
425	4.4	26.8

Stainless steel bodies offer slightly different ratings. Refer to material pressure curves for details.

Performance Data

매개변수	Value
압력 등급	Class 150 / 300 (as required)
Shell Test Pressure (water)	Class 150: 29 bar; Class 300: 76 bar
Seat Test Pressure (water)	Class 150: 21 bar; Class 300: 56 bar
Low-Pressure Air Seat Test	6 bar
Allowable Differential Pressure (bi-directional)	Full rated pressure
Leakage Rate	Zero leakage (metal seated, API 598 Rate A)
Temperature Range (standard metal seal)	-29°C ~ +425°C
Suitable Media	Water, steam, oil, natural gas, corrosive media, etc.
Max. Operating Torque (DN200 Class 150)	Approx. 200 – 350 N·m (on-off, with gearbox)

Electric Actuator Specification (Reference)

As electric actuators vary by brand and control requirements, below is a typical configuration recommendation:

매개변수	Typical Value
Actuator Type	Quarter-turn electric actuator
Mounting Flange	ISO 5211 F14 or F16 (depending on torque)
Max. Output Torque	Based on valve torque + safety factor (DN200 Class 150 approx. 400–600 N·m)
Power Supply	380V / 3Ph / 50Hz or 220V / 1Ph
Control Type	On-Off or Modulating (4-20mA)
Enclosure Protection	IP67 (outdoor type)
Explosion Proof (optional)	Ex d IIB T4 (flameproof)
Accessories	Limit switches, torque switches, heater, local/remote control

주요 특징

Triple offset design – No friction during opening/closing; long service life, low torque
Double flange connection – Can be independently installed between pipeline flanges; easy maintenance; suitable for large bore and high pressure
Bi-directional zero leakage – Metal hard seal for high temperature, high pressure, corrosive and abrasive media
Motorized actuation – Enables remote on/off, local operation, and signal feedback for automated systems
Low operating torque – Lower than conventional hard-seal butterfly valves; allows more economical actuators
Fire safe design (optional) – Compliant with API 607

Ordering Information

Please provide the following when ordering:

Valve size, pressure rating (Class or PN)
Body, disc, and seat materials
Flange standard and face-to-face standard
Media name, temperature, and pressure
Electric actuator power supply, control type (on-off/modulating), protection/explosion-proof rating
Special requirements (fire-safe, low emission packing, third-party certification, etc.)

보증:

SAVVY VALVES는 탁월한 제품 품질과 안심할 수 있는 애프터서비스를 제공하기 위해 최선을 다하고 있습니다. 당사 밸브는 최소 12개월의 서비스 수명을 보장하며, 이 기간 동안 필요한 모든 예비 부품과 자세한 유지보수 지침을 무상으로 제공합니다. 보증 기간 내에 인위적인 손상이 아닌 다른 원인으로 인한 손상이 발생할 경우, 무상으로 부품을 교체하고 전문 기술 지원을 제공합니다. 보증 기간이 만료된 후에는 예비 부품 비용만 지불하시면 되며, 할인된 유지보수 서비스 혜택도 누리실 수 있습니다. 당사의 목표는 신뢰할 수 있는 품질과 포괄적인 애프터서비스를 통해 고객의 운영 비용을 절감하고 생산 효율성을 향상시키는 것입니다. 기술 문의나 유지보수가 필요하시면 언제든지 전문가 팀이 신속하게 대응하여 밸브 시스템이 항상 최적의 성능을 유지하도록 보장합니다.