1-1/2″-300LB-RF Jacket Floating Ball Valve

Product Name 1-1/2″ Class 300 Raised Face Jacketed Floating Ball Valve
Model 1-1/2″-300LB-JACKET-FLOATING-BALL
Nominal Size 1-1/2 inch (DN40)
Pressure Class Class 300 LB (PN50 / approx. 5.0 MPa)
Construction Floating ball, 2 piece or 3 piece (depending on manufacturer)
End Connection Raised Face (RF) flange per ASME B16.5
Jacket Design Integral jacket (welded), for steam or thermal oil heating
Body Material To be specified (Options: A105 carbon steel / F304/F316 stainless steel / others)
Service Condition Viscous or temperature sensitive media requiring heating, e.g. polymers, bitumen, molten sulphur

문의하기

TECHNICAL DATA SHEET

1-1/2″-300LB-RF Jacket Floating Ball Valve

Item	설명
Product Name	1-1/2″ Class 300 Raised Face Jacketed Floating Ball Valve
Model	1-1/2″-300LB-JACKET-FLOATING-BALL
공칭 크기	1-1/2 inch (DN40)
Pressure Class	Class 300 LB (PN50 / approx. 5.0 MPa)
Construction	Floating ball, 2‑piece or 3‑piece (depending on manufacturer)
End Connection	Raised Face (RF) flange per ASME B16.5
Jacket Design	Integral jacket (welded), for steam or thermal oil heating
본체 재질	To be specified (Options: A105 carbon steel / F304/F316 stainless steel / others)
Service Condition	Viscous or temperature‑sensitive media requiring heating, e.g. polymers, bitumen, molten sulphur

Design Basis

매개변수	Standard / Description
Valve Design Standard	ASME B16.34 / API 608 / API 6D
Flange Connection Standard	ASME B16.5 (Class 300 RF)
Face‑to‑Face Dimension	ASME B16.10 (or manufacturer’s standard)
Jacket Design Standard	Per customer requirement or manufacturer’s standard (jacket pressure typically ≤1.6 MPa)
Inspection & Testing	API 598
Pressure Testing	Shell: 1.5× rated pressure; Seat: 1.1× rated pressure

Technical Specifications

매개변수	설명
밸브 유형	Floating ball, full bore or reduced bore (full bore preferred)
Jacket Type	Integral jacket with jacket connections (usually NPT or flanged)
Working Pressure (Main Valve)	Class 300 LB (max. allowable pressure depends on material, ~5.0 MPa @ 38°C)
Working Temperature (Main Valve)	Depends on seat material: – PTFE seats: -29°C ~ +150°C – PEEK seats: -29°C ~ +250°C
Jacket Design Pressure	Typically 0.6 ~ 1.6 MPa (150 ~ 230 psi)
Jacket Connections	Standard 1/4″ NPT or 1/2″ NPT female threads (both sides)
Suitable Media (Main Valve)	Viscous liquids, polymers, bitumen, molten sulphur, hot melt adhesives, chocolate, etc.
작업	Lever handle (standard) / gear operator / pneumatic or electric actuator (optional)
Anti‑static Device	Compliant with API 608 (standard)
Blow‑out Proof Stem	기준
Fire Safe Design	Optional API 607

III. Bill of Materials (Typical Options)

Part Name	Common Material Options
Main Body	A105 carbon steel / F304 stainless steel / F316 stainless steel
End Caps (Side Covers)	Same as body
Jacket	Carbon steel (usually same as body or carbon steel for economy)
공	Same as body + hard chrome plating / electroless nickel plating / Stellite overlay (optional)
줄기	Stainless steel (304/316) / 17-4PH / Monel
Main Seat	PTFE / RPTFE / PEEK / metal seated (for high temperature)
Stem Seal / Packing	PTFE / Graphite / low outgassing material (for vacuum)
Body Gasket	Stainless steel + graphite spiral wound / PTFE / flexible graphite
Jacket Connection	Carbon steel or stainless steel threaded nipple
Studs / Nuts	A193 B7 / A194 2H (for carbon steel body); 304/316 (for stainless steel body)
Handle	Carbon steel (with plastic grip) / Stainless steel

Note: Final material selection must conform to valve nameplate or manufacturer’s material certificate.

Dimensions & Weight (Reference, Full Bore)

크기	Pressure Class	Flange Standard	Face‑to‑Face L (mm)	Center Height H (mm)	Flange OD (mm)	Weight (kg)
1-1/2″	Class 300	ASME B16.5 RF	~190	~110	~200	approx. 8–12 (carbon steel)

Face‑to‑face per ASME B16.10 (long or short pattern); refer to manufacturer data.
Flange dimensions: OD approx. 200 mm for Class 300, 1-1/2″, bolt holes 4×φ22.
Jacket connections are typically 1/2″ NPT female threads on both sides of the valve body.

Jacket Design Features

매개변수	설명
Jacket Coverage	Covers entire body and part of the ends to ensure even heating of the ball cavity
Heating Media	Steam, hot water, thermal oil
Maximum Jacket Pressure	1.6 MPa (higher on request)
Maximum Jacket Temperature	Depends on body material and seals; typically ≤300°C
Connection Type	One NPT female thread on each side (inlet/outlet); flanged connections optional
Jacket Material	Usually same as body or carbon steel (economical)
Welding Requirement	Full penetration weld between jacket and body; pressure tested

주요 특징

Integral Jacket Design – Maintains media temperature inside the valve, preventing solidification or viscosity increase. Ideal for crystallizing or high‑viscosity fluids.
Floating Ball Construction – Bidirectional sealing, quick shut‑off, low flow resistance.
Multiple Seat Options – PTFE / RPTFE / PEEK / metal, for various temperature and wear requirements.
Full Bore or Reduced Bore – Full bore recommended to minimise pressure drop and dead zones.
Anti‑static & Blow‑out Proof Stem – Standard for enhanced safety.
Flanged Connection – ASME B16.5 Class 300 RF, easy installation.
Fire Safe Design Available – Compliant with API 607 upon request.

VII. Applications

Petrochemical: bitumen, heavy oil, wax, polymer transfer
Food industry: chocolate, syrup, fats, oils
Pharmaceutical: hot melt materials, ointments
Coatings & adhesives: hot melt adhesives, paints, resins
Molten sulphur, molten salt systems
Pipelines requiring steam tracing or electric heat tracing

VIII. Testing & Inspection

Test Item	기준	Requirement
Shell Strength (Main Valve)	API 598	1.5× rated pressure, no visible leakage
Low Pressure Seat Test	API 598	0.6 MPa air, no visible bubbles
High Pressure Seat Test	API 598	1.1× rated pressure, zero leakage across seats
Jacket Strength Test	Per design pressure	1.5× jacket design pressure, no leakage
Jacket Seal Test	Per design pressure	No pressure drop during hold
Factory Testing	100%	Each valve with unique serial number and quality tag

Ordering Information

To ensure correct selection, please provide the following when ordering:

Nominal size (1-1/2″ / DN40)
Pressure class (Class 300)
Body and trim material (e.g. A105 carbon steel or 316 stainless steel)
End connection (RF flange; specify flange standard and facing type)
Seat / sealing material (PTFE, PEEK, etc.)
Jacket connection size (typically 1/2″ NPT, can be customised)
Heating medium and maximum jacket temperature / pressure
Media name and operating temperature
Actuation type (manual, pneumatic, electric)
Additional requirements (fire safe, anti‑static, low emission, etc.)

비고

This technical data sheet applies to 1-1/2″-300LB-RF Jacket Floating Ball Valve with unspecified material. The user shall refer to the actual valve nameplate or material certificate.
For a detailed data sheet with a specific material (e.g. A105 or F316), the above can be supplemented accordingly.

보증:

SAVVY VALVES는 탁월한 제품 품질과 안심할 수 있는 애프터서비스를 제공하기 위해 최선을 다하고 있습니다. 당사 밸브는 최소 12개월의 서비스 수명을 보장하며, 이 기간 동안 필요한 모든 예비 부품과 자세한 유지보수 지침을 무상으로 제공합니다. 보증 기간 내에 인위적인 손상이 아닌 다른 원인으로 인한 손상이 발생할 경우, 무상으로 부품을 교체하고 전문 기술 지원을 제공합니다. 보증 기간이 만료된 후에는 예비 부품 비용만 지불하시면 되며, 할인된 유지보수 서비스 혜택도 누리실 수 있습니다. 당사의 목표는 신뢰할 수 있는 품질과 포괄적인 애프터서비스를 통해 고객의 운영 비용을 절감하고 생산 효율성을 향상시키는 것입니다. 기술 문의나 유지보수가 필요하시면 언제든지 전문가 팀이 신속하게 대응하여 밸브 시스템이 항상 최적의 성능을 유지하도록 보장합니다.