DN15-PN64-Ferrule Needle Valve

DN15 – PN64 – Ferrule Needle Valve

Technical Data Sheet

1. General Information

2. Design & Manufacturing Standards

3. Main Materials (Typical)

4. Outline Dimensions & Weight (Typical values – may vary by manufacturer)

 Dimensions above are typical references. Final dimensions to be confirmed with manufacturer’s drawing.

5. Pressure-Temperature Rating (Stainless Steel 316 body)

Note: PN64 is the maximum allowable working pressure at ambient temperature. As temperature increases, pressure must be derated per ASME B16.34. PTFE packing has a maximum service temperature of approx. 200°C; graphite packing is required for higher temperatures.

6. Performance Data

7. Key Features

• Needle stem tip – Provides precise flow regulation for very low flow rates
• Twin ferrule connection – No welding required; reliable leak-tight seal; easy disassembly and maintenance
• Stainless steel body – Excellent corrosion resistance
• Blow-out proof stem – Ensures safety under high pressure
• Replaceable packing – Easy online adjustment or replacement
• Multiple stem tip options – Soft seat (PTFE/PEEK) or metal hard seat (sharp edge / blunt)
• Bi-directional sealing – Can withstand pressure from both directions (arrow indicates recommended flow direction)

8. Installation & Operation Instructions

1. Ferrule installation – Insert tube fully into the ferrule socket. Hand-tighten the nut, then tighten with a wrench 1 – 1.25 turns from finger-tight (follow manufacturer’s instructions).
2. Flow direction – An arrow on the body indicates recommended flow direction. The valve can be used bidirectionally, but pressure drop may differ slightly.
3. Operation – Turn the handle clockwise to close, counterclockwise to open. Needle valves are designed for flow regulation; avoid long-term operation in fully closed or barely open positions.
4. Maintenance – If external leakage occurs, carefully tighten the packing nut after depressurizing. If leakage persists, replace the packing.

9. Ordering Information

Please provide the following when ordering:

1. Valve size (DN15), pressure rating (PN64)
2. End connection: Twin ferrule, tube O.D. (e.g., 12mm or 1/2″)
3. Body material (SS316 / SS304 / other)
4. Stem tip sealing type (metal needle tip / PTFE soft tip)
5. Packing material (PTFE / graphite)
6. Valve configuration (straight pattern / angle pattern)
7. Media name, temperature, and pressure
8. Additional accessories (panel mounting nut, dust cap, etc.)

GUATANTEE:

SAVVY VALVES is committed to delivering exceptional product quality and worry-free after-sales service. Our valves are guaranteed to provide a minimum service life of 12 months, during which we will supply all necessary spare parts and detailed maintenance instructions free of charge. Within the warranty period, if any non-human-induced damage occurs, we will replace components at no cost and provide professional technical support. After the warranty expires, customers only need to pay for the cost of spare parts, while still benefiting from discounted maintenance services. Our goal is to help clients reduce operational costs and enhance production efficiency through reliable quality and comprehensive after-sales support. Whether for technical inquiries or maintenance needs, our expert team will respond promptly to ensure your valve system maintains optimal performance at all times.