DN15-PN64-Ferrule Needle Valve

DN15 – PN64 – Ferrule Needle Valve

Technical Data Sheet

1. General Information

2. Design & Manufacturing Standards

3. Main Materials (Typical)

4. Outline Dimensions & Weight (Typical values – may vary by manufacturer)

 Dimensions above are typical references. Final dimensions to be confirmed with manufacturer’s drawing.

5. Pressure-Temperature Rating (Stainless Steel 316 body)

Note: PN64 is the maximum allowable working pressure at ambient temperature. As temperature increases, pressure must be derated per ASME B16.34. PTFE packing has a maximum service temperature of approx. 200°C; graphite packing is required for higher temperatures.

6. Performance Data

7. Características principales

• Needle stem tip – Provides precise flow regulation for very low flow rates
• Twin ferrule connection – No welding required; reliable leak-tight seal; easy disassembly and maintenance
• Stainless steel body – Excellent corrosion resistance
• Blow-out proof stem – Ensures safety under high pressure
• Replaceable packing – Easy online adjustment or replacement
• Multiple stem tip options – Soft seat (PTFE/PEEK) or metal hard seat (sharp edge / blunt)
• Bi-directional sealing – Can withstand pressure from both directions (arrow indicates recommended flow direction)

8. Installation & Operation Instructions

1. Ferrule installation – Insert tube fully into the ferrule socket. Hand-tighten the nut, then tighten with a wrench 1 – 1.25 turns from finger-tight (follow manufacturer’s instructions).
2. Flow direction – An arrow on the body indicates recommended flow direction. The valve can be used bidirectionally, but pressure drop may differ slightly.
3. Operación – Turn the handle clockwise to close, counterclockwise to open. Needle valves are designed for flow regulation; avoid long-term operation in fully closed or barely open positions.
4. Maintenance – If external leakage occurs, carefully tighten the packing nut after depressurizing. If leakage persists, replace the packing.

9. Ordering Information

Please provide the following when ordering:

1. Valve size (DN15), pressure rating (PN64)
2. End connection: Twin ferrule, tube O.D. (e.g., 12mm or 1/2″)
3. Body material (SS316 / SS304 / other)
4. Stem tip sealing type (metal needle tip / PTFE soft tip)
5. Packing material (PTFE / graphite)
6. Valve configuration (straight pattern / angle pattern)
7. Media name, temperature, and pressure
8. Additional accessories (panel mounting nut, dust cap, etc.)

GARANTÍA:

SAVVY VALVES se compromete a ofrecer una calidad de producto excepcional y un servicio posventa sin complicaciones. Nuestras válvulas tienen una vida útil mínima garantizada de 12 meses, durante los cuales suministraremos todos los repuestos necesarios e instrucciones detalladas de mantenimiento de forma gratuita. Durante el período de garantía, si se produce algún daño no provocado por el hombre, reemplazaremos los componentes sin coste alguno y ofreceremos soporte técnico profesional. Una vez vencida la garantía, los clientes solo deberán pagar el coste de los repuestos y seguirán beneficiándose de descuentos en los servicios de mantenimiento. Nuestro objetivo es ayudar a los clientes a reducir los costes operativos y mejorar la eficiencia de la producción mediante una calidad fiable y un soporte posventa integral. Ya sea para consultas técnicas o necesidades de mantenimiento, nuestro equipo de expertos responderá con prontitud para garantizar que su sistema de válvulas mantenga un rendimiento óptimo en todo momento.