DN15-PN64-Ferrule Needle Valve

DN15 – PN64 – Ferrule Needle Valve

Technical Data Sheet

1. General Information

2. Design & Manufacturing Standards

3. Main Materials (Typical)

4. Outline Dimensions & Weight (Typical values – may vary by manufacturer)

 Dimensions above are typical references. Final dimensions to be confirmed with manufacturer’s drawing.

5. Pressure-Temperature Rating (Stainless Steel 316 body)

Note: PN64 is the maximum allowable working pressure at ambient temperature. As temperature increases, pressure must be derated per ASME B16.34. PTFE packing has a maximum service temperature of approx. 200°C; graphite packing is required for higher temperatures.

6. Performance Data

7. Belangrijkste kenmerken

• Needle stem tip – Provides precise flow regulation for very low flow rates
• Twin ferrule connection – No welding required; reliable leak-tight seal; easy disassembly and maintenance
• Stainless steel body – Excellent corrosion resistance
• Blow-out proof stem – Ensures safety under high pressure
• Replaceable packing – Easy online adjustment or replacement
• Multiple stem tip options – Soft seat (PTFE/PEEK) or metal hard seat (sharp edge / blunt)
• Bi-directional sealing – Can withstand pressure from both directions (arrow indicates recommended flow direction)

8. Installation & Operation Instructions

1. Ferrule installation – Insert tube fully into the ferrule socket. Hand-tighten the nut, then tighten with a wrench 1 – 1.25 turns from finger-tight (follow manufacturer’s instructions).
2. Flow direction – An arrow on the body indicates recommended flow direction. The valve can be used bidirectionally, but pressure drop may differ slightly.
3. Operatie – Turn the handle clockwise to close, counterclockwise to open. Needle valves are designed for flow regulation; avoid long-term operation in fully closed or barely open positions.
4. Maintenance – If external leakage occurs, carefully tighten the packing nut after depressurizing. If leakage persists, replace the packing.

9. Ordering Information

Please provide the following when ordering:

1. Valve size (DN15), pressure rating (PN64)
2. End connection: Twin ferrule, tube O.D. (e.g., 12mm or 1/2″)
3. Body material (SS316 / SS304 / other)
4. Stem tip sealing type (metal needle tip / PTFE soft tip)
5. Packing material (PTFE / graphite)
6. Valve configuration (straight pattern / angle pattern)
7. Media name, temperature, and pressure
8. Additional accessories (panel mounting nut, dust cap, etc.)

GARANTIE:

SAVVY VALVES streeft naar uitzonderlijke productkwaliteit en zorgeloze aftersalesservice. Onze kleppen hebben een gegarandeerde minimale levensduur van 12 maanden. Gedurende deze periode leveren wij alle benodigde reserveonderdelen en gedetailleerde onderhoudsinstructies gratis. Mocht er binnen de garantieperiode schade ontstaan ​​die niet door mensen is veroorzaakt, dan vervangen wij kosteloos de onderdelen en bieden wij professionele technische ondersteuning. Na de garantieperiode hoeven klanten alleen de kosten van de reserveonderdelen te betalen en profiteren zij nog steeds van kortingen op onderhoudsdiensten. Ons doel is om klanten te helpen de operationele kosten te verlagen en de productie-efficiëntie te verbeteren door middel van betrouwbare kwaliteit en uitgebreide aftersalesservice. Of het nu gaat om technische vragen of onderhoudsbehoeften, ons deskundige team reageert snel om ervoor te zorgen dat uw klepsysteem te allen tijde optimaal blijft presteren.