DN40-PN40 BW Ends SS Y Strainer

Nominal Size DN40 (1 1/2 inch)
Pressure Rating PN40
Working Pressure Up to 40 bar (Depending on Temperature)
Temperature Range -29°C to 300°C (-20°F to 572°F) * (Dependent on gasket/seal material)*
Connection Ends Butt Weld (BW) – Beveled ends for welding
Flow Direction As indicated by arrow on body (typically single direction)
Filtering Area Ratio 3:1 to 5:1 (Screen to pipe area)

اتصل بنا

TECHNICAL DATA SHEET

Product Name: DN40 PN40 Stainless Steel Y-Type Strainer (Butt Weld Ends)

Product Description

This is a high-quality Y-type strainer designed for the protection of pipeline equipment such as pumps, valves, and flow meters. It is manufactured from stainless steel to remove solid particles from liquid or gas media. The butt weld ends ensure a permanent, leak-proof seal when welded into the pipeline. The “Y” pattern design allows for a compact installation and easy maintenance with low pressure drop.

الميزات الرئيسية

Design: Compact Y-pattern design ideal for horizontal or vertical pipelines (flow direction downwards).
مادة الجسم: Full Stainless Steel construction (CF8/CF8M or forged equivalent) providing excellent corrosion resistance.
Connection: Butt Weld (BW) ends conforming to ASME B16.25 or EN 12627, suitable for high-integrity welding.
Screen: Perforated or mesh screen in Stainless Steel for effective particle filtration.
Maintenance: Easy access to the screen via a threaded or bolted cover plug without removing the strainer body from the pipeline.
Blow-off Connection: Optional side drain plug for flushing out debris.

Technical Specifications

المعلمة	مواصفة
الحجم الاسمي	DN40 (1 1/2 inch)
تصنيف الضغط	PN40
Working Pressure	Up to 40 bar (Depending on Temperature)
نطاق درجة الحرارة	-29°C to 300°C (-20°F to 572°F) * (Dependent on gasket/seal material)*
Connection Ends	Butt Weld (BW) – Beveled ends for welding
Flow Direction	As indicated by arrow on body (typically single direction)
Filtering Area Ratio	3:1 to 5:1 (Screen to pipe area)

Material of Construction

Part Name	Material / Standard
Body (Strainer Housing)	SS 304 / SS 316 (Cast: ASTM A351 CF8/CF8M or Forged: ASTM A182)
Cover / Plug	SS 304 / SS 316
Screen	SS 304 / SS 316 (Perforated or Woven Mesh)
Gasket / Seal	Compressed Non-Asbestos Fiber (CNAF) / Graphite
Fasteners (Bolts)	Stainless Steel (if cover is bolted)

Note: Please specify if CF8 (304) or CF8M (316) material is required.

Applicable Standards

Design & Manufacture: ASME B16.34 / EN 13709 or similar.
Face-to-Face Dimensions: Manufacturer’s standard (in-line).
End Connections: ASME B16.25 (Butt Weld) or EN 12627.
Testing: API 598 / EN 12266-1.

Dimensions (Reference: mm / inches)

Dimensions are typical and may vary slightly depending on the manufacturer’s design.

مقاس	D (Body Dia.)	L (Face-to-Face Length)	H (Overall Height)	Screen Dia.	Weight (approx.)
DN40 (1.5″)	50 mm	200 – 230 mm	110 mm	40 mm	3.5 – 4.5 kg

Note: The Face-to-Face length (L) varies by manufacturer. The Height (H) is from centerline to top of cover plug.

Screen Specifications (Standard Offering)

Screen Type	Mesh / Perforation	Retention (Particle Size)	طلب
Perforated	1.5 mm – 3.0 mm dia.	Coarse Filtration	Water, Slurries, General Protection
Mesh Lined	20 mesh to 100 mesh	Fine Filtration	Steam, Light Oil, Gas

Note: Screens can be customized for specific filtration requirements.

Test Pressure (Hydrostatic)

Test Procedure	Pressure (Bar)
Shell (Body) Test	60 Bar (1.5 x PN Rating)
Seat (Sealing) Test	N/A (Strainers typically have no pressure-sealing seat)

Disclaimer: The information provided above is based on standard industry practices. For physical specifications and custom configurations, please refer to the official drawings or consult the factory. It is recommended to verify material and mesh compatibility for specific media and operating conditions.

ضمان:

تلتزم شركة سافي فالفز بتقديم منتجات عالية الجودة وخدمة ما بعد البيع مريحة. نضمن لصماماتنا عمر خدمة لا يقل عن ١٢ شهرًا، نوفر خلالها جميع قطع الغيار اللازمة وتعليمات الصيانة المفصلة مجانًا. خلال فترة الضمان، في حال حدوث أي ضرر غير بشري، نستبدل المكونات مجانًا ونقدم دعمًا فنيًا احترافيًا. بعد انتهاء الضمان، يدفع العميل فقط تكلفة قطع الغيار، مع الاستفادة من خدمات الصيانة المخفضة. هدفنا هو مساعدة عملائنا على خفض تكاليف التشغيل وتحسين كفاءة الإنتاج من خلال جودة موثوقة ودعم شامل لما بعد البيع. سواءً للاستفسارات الفنية أو احتياجات الصيانة، سيستجيب فريق خبرائنا على الفور لضمان الحفاظ على الأداء الأمثل لنظام صماماتك في جميع الأوقات.

منتجات البيع الساخنة

منذ أكثر من 10 سنوات، كنا المورد الرائد للصمامات الصناعية للمشاريع العالمية الكبرى في إمدادات المياه والنفط والغاز وتحلية المياه.