3“ 150LB PFA Fully Internal Lined Butterfly Valves

Technical Data Sheet: 3″ 150LB PFA Fully Internal Lined Butterfly Valve

1. Product Description

This 3-inch, Class 150 flanged (Wafer/Lug) butterfly valve features a body and disc fully encapsulated with PFA (Perfluoroalkoxy) lining. It is specifically designed for highly corrosive chemicals, high-purity media, and severe service conditions, ensuring absolute isolation of the metal components from the process fluid and achieving bi-directional zero leakage.

2. Technical Specifications

3. Materials of Construction

4. Performance Data

• Operating Temperature: -29°C to +180°C (-20°F to +356°F)
• Leckageklasse: Bi-directional Zero Leakage (ISO 5208 Rate A / ANSI FCI 70-2 Class VI)
• Suitable Media: Strong acids (Sulfuric, Hydrochloric, Hydrofluoric), strong alkalis, organic solvents, high-purity water, wet chlorine gas, etc.
• Vacuum Service: Applicable, full vacuum rated within -10°C to +160°C (+14°F to +320°F)
• Lining Integrity Test: 100% High Voltage Spark Test (15kV or 10kV DC) performed on every valve to ensure zero pinhole defects.

5. Pressure-Temperature Ratings

(Based on Class 150LB and PFA mechanical properties, typical values)

*Note: Final pressure-temperature ratings must comply with ASME B16.34 and the lining manufacturer’s specific data.*

6. Hauptmerkmale

• Full Isolation: The body and disc are completely encapsulated with PFA, eliminating any contact between the metal and the media. Provides superior anti-corrosion performance.
• Low Torque Operation: The extremely low friction coefficient of the PFA surface, combined with PTFE bearings, results in low operating torque and prevents sticking.
• Bi-directional Sealing: The spherically machined disc matched with the integrated PFA seat ensures bubble-tight sealing in both directions.
• Blow-out Proof Stem: Features an integral safety step design, preventing the stem from being ejected under high pressure or differential pressure.
• Standardized Mounting: The top flange adheres to ISO 5211 standards, allowing direct mounting of various actuators without the need for complex brackets.

7. Precautions & Notes

1. Slurry/Media: Avoid media containing hard solid particles, as this may scratch or damage the PFA lining surface.
2. Installation: Flange bolts must be tightened evenly and symmetrically. The Lug-style design allows for downstream pipe disconnection while the upstream side remains pressurized.
3. Storage: Valves should be stored in a dry, ventilated indoor environment, slightly open, protected from direct sunlight and any physical impact that could damage the lining.

This technical data sheet is based on general industry standards and typical product specifications. Exact dimensions and confirmed performance parameters shall be subject to the final vendor-certified drawing.

GARANTIE:

SAVVY VALVES steht für herausragende Produktqualität und einen sorgenfreien Kundendienst. Unsere Ventile haben eine garantierte Mindestlebensdauer von 12 Monaten. Innerhalb dieser Zeit liefern wir Ihnen kostenlos alle notwendigen Ersatzteile und detaillierte Wartungsanleitungen. Bei nicht menschlich verursachten Schäden innerhalb der Garantiezeit ersetzen wir Komponenten kostenlos und bieten professionellen technischen Support. Nach Ablauf der Garantie zahlen Sie lediglich die Kosten für Ersatzteile und profitieren weiterhin von vergünstigten Wartungsleistungen. Unser Ziel ist es, Kunden durch zuverlässige Qualität und umfassenden Kundendienst dabei zu unterstützen, Betriebskosten zu senken und die Produktionseffizienz zu steigern. Ob technische Anfragen oder Wartungsbedarf – unser Expertenteam reagiert umgehend, um sicherzustellen, dass Ihr Ventilsystem jederzeit optimal funktioniert.