DN15-PN16-BSPT Brass Gate Valve

DN15 – PN16 – BSPT Brass Gate Valve

Technical Data Sheet

1. General Information

2. Design & Manufacturing Standards

3. Main Materials (Typical)

4. Outline Dimensions & Weight (Typical values – may vary by manufacturer)

 Dimensions above are typical references. Final dimensions may vary by manufacturer; confirm with actual product or drawing.

5. Pressure-Temperature Rating (Brass body)

Note: Brass valves are generally suitable for temperatures ≤150°C. Above 120°C, pressure must be significantly derated. PTFE packing has a maximum service temperature of approx. 150°C.

6. Performance Data

7. Belangrijkste kenmerken

• Brass body – Good corrosion resistance and machinability; suitable for water and low pressure steam
• BSPT taper thread – Reliable sealing, easy installation; no need for additional sealing tape
• Non-rising stem design – Compact construction, ideal for space‑limited installations
• Full bore or reduced bore – Typically reduced bore (slightly lower flow capacity than pipe size)
• Low operating torque – Light handwheel operation
• Cost effective – Widely used in construction, HVAC, water supply and drainage

8. Installation & Operation Instructions

1. Thread connection – Apply PTFE tape or thread sealant to BSPT male threads. Screw in clockwise. Do not over‑tighten to avoid cracking the valve body.
2. Flow direction – Gate valves generally have no flow direction restriction, but it is recommended to install with the arrow (if marked) or horizontally.
3. Operatie – Turn handwheel clockwise to close, counter‑clockwise to open. Valve should be fully open or fully closed; not suitable for throttling (may erode sealing surfaces).
4. Maintenance – If stem leakage occurs, carefully tighten the packing gland nut. If leakage persists, replace the packing.

9. Ordering Information

Please provide the following when ordering:

1. Valve size (DN15), pressure rating (PN16)
2. End connection: BSPT female thread
3. Body material: Brass (specify lead‑free brass if required)
4. Stem type (non‑rising stem typical)
5. Sealing type (brass body / PTFE coated)
6. Media name, temperature, and pressure
7. Quantity and packaging requirements

GARANTIE:

SAVVY VALVES streeft naar uitzonderlijke productkwaliteit en zorgeloze aftersalesservice. Onze kleppen hebben een gegarandeerde minimale levensduur van 12 maanden. Gedurende deze periode leveren wij alle benodigde reserveonderdelen en gedetailleerde onderhoudsinstructies gratis. Mocht er binnen de garantieperiode schade ontstaan ​​die niet door mensen is veroorzaakt, dan vervangen wij kosteloos de onderdelen en bieden wij professionele technische ondersteuning. Na de garantieperiode hoeven klanten alleen de kosten van de reserveonderdelen te betalen en profiteren zij nog steeds van kortingen op onderhoudsdiensten. Ons doel is om klanten te helpen de operationele kosten te verlagen en de productie-efficiëntie te verbeteren door middel van betrouwbare kwaliteit en uitgebreide aftersalesservice. Of het nu gaat om technische vragen of onderhoudsbehoeften, ons deskundige team reageert snel om ervoor te zorgen dat uw klepsysteem te allen tijde optimaal blijft presteren.