Motorized Triple offset Double Flange Butterfly Valve

Valve Type Triple Offset Butterfly Valve
Nominal Size DN200 (8 Inch) or as specified
Pressure Rating Class 150 (PN20) or Class 300 / PN optional
End Connection Double Flange (to ASME B16.5 or EN 1092-1)
Operation Motorized Actuator

お問い合わせ

Motorized Triple Offset Double Flange Butterfly Valve

Technical Data Sheet
(Typical Size: DN200 / Class 150 – can be customized)

General Information

Item	Description
バルブタイプ	Triple Offset Butterfly Valve
公称サイズ	DN200 (8 Inch) or as specified
圧力定格	Class 150 (PN20) or Class 300 / PN optional
End Connection	Double Flange (to ASME B16.5 or EN 1092-1)
手術	電動アクチュエータ
応用	Bi-directional tight shut-off, frequent operation, high temperature / high pressure / corrosive media, steam, oil, natural gas, etc.

Design & Manufacturing Standards

標準	Description
Design Code	API 609 (Category B – Triple Offset)
Flange Dimensions	ASME B16.5 Class 150 / 300 or EN 1092-1 PN10/PN16/PN25/PN40
Face-to-Face Dimension	API 609 (short or long pattern) or EN 558 Series 13 / 14
Pressure-Temperature Rating	ASME B16.34
Top Flange	ISO 5211 (for direct actuator mounting)
Inspection & Testing	API 598
Leakage Rate	API 598 Rate A / ISO 5208 Rate A (Zero leakage)
Fire Safe Design	API 607 / ISO 10497 (optional)

Main Materials (Typical – can be customized)

Component	Standard Material	Optional Materials
体	Carbon Steel (WCB)	Stainless Steel CF8M, CF3M, Duplex SS, Alloy Steel
ディスク	Stainless Steel CF8M	Duplex SS, Hastelloy, Nickel-Aluminum Bronze
幹	17-4PH Precipitation Hardening SS	Inconel, Monel, Duplex SS
Seat Sealing Surface	Stellite hardfacing	Nickel-based alloy, Tungsten Carbide
Seal Ring	Multi-layer metal + graphite	All-metal seal, PTFE (low temperature)
Packing	Flexible graphite + SS spacer rings	PTFE + graphite, low emission packing
Fasteners	Stainless Steel A193 B8	Alloy Steel B7
Gaskets	Flexible graphite + SS spiral wound	Metal ring gasket

Outline Dimensions & Weight (Typical – DN200 Class 150)

Dimension Parameter	Value (Short pattern, API 609)
Face-to-Face Length L	Approx. 152 mm (DN200 Class 150 short)
Flange Outer Diameter D	Approx. 345 mm (ASME B16.5 Class 150)
Bolt Circle Diameter K	Approx. 298 mm
Flange Thickness C	Approx. 29 mm
Number / Diameter of Bolt Holes	12 × 25 mm
Center Height (flange face to center)	Approx. 108 mm
Overall Height (excluding actuator) H	Approx. 450 mm
Valve Weight (excluding actuator)	Approx. 85 kg
Electric Actuator Weight (reference)	Approx. 25 – 50 kg (depending on torque and brand)

Dimensions above are typical references. Final dimensions to be confirmed with manufacturer’s drawing.

Pressure-Temperature Rating (ASME B16.34 – WCB body)

Temperature (°C)	Max. Working Pressure (bar) – Class 150	Max. Working Pressure (bar) – Class 300
-29 ~ 38	19.6	51.1
100	17.6	46.6
150	15.3	44.8
200	13.2	41.9
250	11.2	39.5
300	9.2	37.1
350	7.5	34.1
400	5.5	30.2
425	4.4	26.8

Stainless steel bodies offer slightly different ratings. Refer to material pressure curves for details.

Performance Data

パラメータ	Value
圧力定格	Class 150 / 300 (as required)
Shell Test Pressure (water)	Class 150: 29 bar; Class 300: 76 bar
Seat Test Pressure (water)	Class 150: 21 bar; Class 300: 56 bar
Low-Pressure Air Seat Test	6 bar
Allowable Differential Pressure (bi-directional)	Full rated pressure
Leakage Rate	Zero leakage (metal seated, API 598 Rate A)
Temperature Range (standard metal seal)	-29°C ~ +425°C
Suitable Media	Water, steam, oil, natural gas, corrosive media, etc.
Max. Operating Torque (DN200 Class 150)	Approx. 200 – 350 N·m (on-off, with gearbox)

Electric Actuator Specification (Reference)

As electric actuators vary by brand and control requirements, below is a typical configuration recommendation:

パラメータ	Typical Value
Actuator Type	Quarter-turn electric actuator
Mounting Flange	ISO 5211 F14 or F16 (depending on torque)
Max. Output Torque	Based on valve torque + safety factor (DN200 Class 150 approx. 400–600 N·m)
Power Supply	380V / 3Ph / 50Hz or 220V / 1Ph
Control Type	On-Off or Modulating (4-20mA)
Enclosure Protection	IP67 (outdoor type)
Explosion Proof (optional)	Ex d IIB T4 (flameproof)
Accessories	Limit switches, torque switches, heater, local/remote control

主な特徴

Triple offset design – No friction during opening/closing; long service life, low torque
Double flange connection – Can be independently installed between pipeline flanges; easy maintenance; suitable for large bore and high pressure
Bi-directional zero leakage – Metal hard seal for high temperature, high pressure, corrosive and abrasive media
Motorized actuation – Enables remote on/off, local operation, and signal feedback for automated systems
Low operating torque – Lower than conventional hard-seal butterfly valves; allows more economical actuators
Fire safe design (optional) – Compliant with API 607

Ordering Information

Please provide the following when ordering:

Valve size, pressure rating (Class or PN)
Body, disc, and seat materials
Flange standard and face-to-face standard
Media name, temperature, and pressure
Electric actuator power supply, control type (on-off/modulating), protection/explosion-proof rating
Special requirements (fire-safe, low emission packing, third-party certification, etc.)

保証:

SAVVY VALVESは、卓越した製品品質と安心のアフターサービスの提供に尽力しています。当社のバルブは最低12ヶ月の耐用年数を保証しており、その期間中は必要なスペアパーツと詳細なメンテナンスマニュアルを無料でご提供いたします。保証期間中に人為的要因以外の損傷が発生した場合は、無償で部品を交換し、専門的な技術サポートを提供いたします。保証期間終了後は、スペアパーツ代のみご負担いただき、割引メンテナンスサービスは引き続きご利用いただけます。当社の目標は、信頼性の高い品質と包括的なアフターサービスを通じて、お客様の運用コスト削減と生産効率の向上を支援することです。技術的なお問い合わせやメンテナンスのご依頼など、当社の専門チームが迅速に対応し、お客様のバルブシステムが常に最適なパフォーマンスを維持できるよう尽力いたします。

人気商品

当社は 10 年以上にわたり、給水、石油・ガス、淡水化の分野における世界規模の主要プロジェクト向け産業用バルブの大手サプライヤーとして活躍しています。