4-1/16″-3000PSI Adjustable Angle Choke Valve

Product Name Adjustable Angle Choke Valve
Valve Type Angle Pattern (Vertical Inlet / Horizontal Outlet)
Nominal Size 4″ (4 1/16″ / 103 mm nominal bore)
Pressure Rating 3000 PSI (21 MPa)
End Connections Flanged (API 6A), Optional: Hub or Welded
Design Standard API Spec 6A / API Spec 16C

お問い合わせ

Technical Data Sheet: 4-1/16″-3000PSI Adjustable Angle Choke Valve

Item	仕様
Product Name	Adjustable Angle Choke Valve
バルブタイプ	Angle Pattern (Vertical Inlet / Horizontal Outlet)
公称サイズ	4″ (4 1/16″ / 103 mm nominal bore)
圧力定格	3000 PSI (21 MPa)
End Connections	Flanged (API 6A), Optional: Hub or Welded
Design Standard	API Spec 6A / API Spec 16C

General Description

The Adjustable Angle Choke Valve is a critical component used in oil and gas wellhead assemblies (Christmas trees) and kill/choke manifolds. Its primary function is to regulate and control the flow rate and pressure of produced fluids (oil, gas, and water) from the well . By manually turning the handwheel, the stem advances or retracts a tapered needle or plug relative to a seat, precisely varying the flow area. This model features a robust angle body design (90°) which inherently provides erosion resistance by directing flow away from the sealing surfaces .

Technical Parameters

パラメータ	Value / Range	Remarks
圧力定格	3000 PSI (21 MPa)	Working pressure per API 6A
Nominal Bore Size	4 1/16″ (103 mm)	Corresponds to 4″ nominal size
Temperature Class	PU / L-U	Standard: -29°C to 121°C (-20°F to 250°F)
Material Class	AA	Standard for general service (Other classes like BB, CC, DD, EE, FF available on request)
Specification Level (PSL)	PSL 1	PSL 2 and 3 available for higher requirements
Performance Level (PR)	PR 1	PR 2 available for critical service
Suitable Media	Petroleum, Natural Gas, Drilling Mud, Water	Fluids containing sand or solids are acceptable due to hardened trim
Flow Direction	Under the seat (angle pattern)	Standard: Inlet vertical, outlet horizontal
Adjustment Type	Manual (Handwheel)	Rising stem with visual position indicator
Stem Operation	Rotating / Rising	Handwheel turns clockwise to close (decrease flow)

Materials of Construction

Component	Standard Material	Remarks / Alternative
Valve Body	WCB (Carbon Steel) / A105	Meets NACE MR0175 for sour service upon request
Bonnet / Cover	WCB (Carbon Steel) / A105
Stem / Needle	Hardened Stainless Steel	2Cr13, 17-4PH, Inconel 718 for high strength
Choke Seat / Nozzle	Tungsten Carbide / Stellite	Interchangeable for fixed orifice applications; provides extreme erosion resistance
Stem Tip / Plug	Tungsten Carbide / Stellite	Ensures long life under high-velocity flow
Packing / Seals	PTFE / Flexible Graphite	High temperature and chemical resistance
Gasket (Body/Bonnet)	Ring Type Joint (RTJ)	Material: Soft Iron or Stainless Steel (depending on class)
Handwheel	Carbon Steel	Position indicator window included

Dimensional Data (Approximate)

Note: Dimensions may vary by manufacturer. For exact installation dimensions, please consult the specific manufacturer’s GA drawing.

Dimension	Value (mm)	Value (inches)	Remarks
Valve Size (Nominal)	103 mm	4 1/16″
End-to-End (Face-to-Face)	298 mm	11.73″	For 4 1/16″-3000PSI Angle Valve
Center to Top (Height)	264 mm	10.39″	From centerline of outlet to top of bonnet
Flange Diameter	292 mm	11.5″	Approx. for API 6A 3000PSI Flange
Bolt Circle Diameter	244.5 mm	9.62″	Approx. for API 6A 3000PSI Flange
Hub / Ring Gasket	R37		Ring groove for 4 1/16″-3000PSI
Approx. Weight	180 – 230 kg	400 – 500 lbs	Depends on trim and manufacturer

Applicable Standards & Specifications

Design & Manufacture: API Spec 6A (Specification for Wellhead and Christmas Tree Equipment)
Additional Design: API Spec 16C (Choke and Kill Systems)
Flange Connections: API 6A (6B / 6BX Flanges)
Testing: API 6A / API 16C (Hydrostatic and Gas testing)
NACE Compliance: NACE MR0175 / ISO 15156 (for H₂S service – optional)

Key Features & Applications

Key Features:

Precise Flow Control: Allows fine-tuning of flow rates and pressures through a linear or equal percentage characteristic.
Erosion Resistance: The hardened trim (Tungsten Carbide/Stellite) withstands the destructive forces of high-velocity, solids-laden fluids .
Angle Pattern Design: The 90-degree body design helps protect the stem and sealing area from direct impingement of flow media, extending valve life .
Visual Indication: A protected position indicator on the bonnet shows the exact opening percentage of the valve .
Interchangeable Trim (Optional): Some models allow conversion between adjustable and fixed choke modes by changing the internal nozzle.

Main Applications:

Wellhead Christmas Trees: Regulating production from oil and gas wells .
Kill and Choke Manifolds: Controlling well pressure during drilling and workover operations .
Flow Lines: As a primary control valve for flow rate and pressure reduction.
Test Separators: Controlling flow into testing equipment.

Ordering Information

When ordering, please specify:

Valve Size: 4 1/16″
Pressure Rating: 3000 PSI
End Connection Type: Flanged (API 6A) / Hub / Weld End
Material Class: AA, BB, etc.
Temperature Class: PU (Standard) or others
Specification Level (PSL): 1, 2, or 3
NACE Requirement: Yes / No
Special Trim: If required (e.g., Full Tungsten Carbide)

Notes:

This datasheet is a general guide based on API specifications and common industry practices.
Always refer to the manufacturer’s certified dimensional drawing for installation.
Pressure and temperature ratings are maximum allowable and should not be exceeded.

保証:

SAVVY VALVESは、卓越した製品品質と安心のアフターサービスの提供に尽力しています。当社のバルブは最低12ヶ月の耐用年数を保証しており、その期間中は必要なスペアパーツと詳細なメンテナンスマニュアルを無料でご提供いたします。保証期間中に人為的要因以外の損傷が発生した場合は、無償で部品を交換し、専門的な技術サポートを提供いたします。保証期間終了後は、スペアパーツ代のみご負担いただき、割引メンテナンスサービスは引き続きご利用いただけます。当社の目標は、信頼性の高い品質と包括的なアフターサービスを通じて、お客様の運用コスト削減と生産効率の向上を支援することです。技術的なお問い合わせやメンテナンスのご依頼など、当社の専門チームが迅速に対応し、お客様のバルブシステムが常に最適なパフォーマンスを維持できるよう尽力いたします。

人気商品

当社は 10 年以上にわたり、給水、石油・ガス、淡水化の分野における世界規模の主要プロジェクト向け産業用バルブの大手サプライヤーとして活躍しています。