1000PSI 2 Piece Solid Bar Forged Floating Ball Valves

Technical Datasheet: 2-Piece Floating Ball Valve

Product Name: 2-Piece Floating Ball Valve
Connection: Female Threaded NPT (National Pipe Thread)
Peringkat Tekanan: 1000 PSI (WOG)
Body Construction: Bar Stock (Forged Bar)

1. General Design Features

• Jenis: 2-piece, split body construction (Side Entry). Consists of a main body and an end cap secured by bolts.
• Material: Machined from solid steel bars (e.g., Stainless Steel or Carbon Steel). This forged/bar stock construction offers higher density and strength compared to castings.
• End Connections: Female threaded ends conforming to ASME B1.20.1 (NPT) standards.
• Ball Design: Floating ball principle. The ball is not fixed; under pressure, it floats downstream against the seat to ensure a tight seal.
• Blowout-Proof Stem: The stem is inserted from inside the body and features a blowout-proof shoulder, preventing stem ejection due to internal pressure.
• Port Type: Full Port (full bore) or Reduced Port depending on size (Full Port minimizes pressure drop and turbulence).
• Operasi: Standard lever handle with locking device (material: plated carbon steel or stainless steel). Suitable for mounting extensions or actuators.

2. Applicable Standards & Specifications

3. Operating Parameters

4. Bill of Materials (Typical Material Selection)

Note: The following is based on a standard stainless steel build. Carbon steel options are listed for reference.

5. Dimensional Data (Reference)

Note: Dimensions are industry standard references. Please verify with the specific manufacturer’s drawing.

6. Inspection & Testing Procedure

• Shell Test: Valve partially open. Hydrostatic test at 1.5 times the rated pressure. Check body, end cap joints, and stem area for leaks.
• Seat Test: Valve closed. Hydrostatic or pneumatic test at 1.1 times the rated pressure. Check for leakage across the seat.
• Low-Pressure Seat Test: Air test at 80 PSI (approx. 0.6 MPa) to verify sealing integrity at low pressure.

7. Options & Special Features

• Antistatic Device: Optional springs between ball and stem to ensure electrical continuity (per API 608).
• Fire-Safe Design: Optional design qualified to API 607 / ISO 10497.
• Actuator Mounting: Top flange designed to ISO 5211 for direct mounting of pneumatic, electric, or worm gear actuators.
• Stem Extension: Available for buried service or insulated piping.

JAMINAN:

SAVVY VALVES berkomitmen untuk memberikan kualitas produk yang luar biasa dan layanan purnajual yang bebas masalah. Katup kami dijamin memberikan masa pakai minimal 12 bulan, di mana kami akan menyediakan semua suku cadang yang diperlukan dan petunjuk perawatan terperinci secara gratis. Dalam masa garansi, jika terjadi kerusakan yang bukan disebabkan oleh manusia, kami akan mengganti komponen tanpa biaya dan memberikan dukungan teknis yang profesional. Setelah masa garansi berakhir, pelanggan hanya perlu membayar biaya suku cadang, sambil tetap mendapatkan keuntungan dari layanan perawatan dengan harga diskon. Tujuan kami adalah membantu klien mengurangi biaya operasional dan meningkatkan efisiensi produksi melalui kualitas yang andal dan dukungan purnajual yang komprehensif. Baik untuk pertanyaan teknis maupun kebutuhan perawatan, tim ahli kami akan segera merespons untuk memastikan sistem katup Anda mempertahankan kinerja yang optimal setiap saat.