20″-600LB-RF 3-Piece Trunnion Ball Valve Forged

20″ – 600LB – RF 3-Piece Forged Trunnion Ball Valve

Technical Data Sheet

1. General Information

2. Design & Manufacturing Standards

3. Main Materials (Typical – can be customized)

Note: A105 and A105N are the same material; A105N is normalized.

4. Outline Dimensions & Weight

 Dimensions above are typical references. Final dimensions to be confirmed with manufacturer’s drawing.

5. Pressure-Temperature Rating (ASME B16.34 – Carbon Steel Group 1.1)

Data based on ASME B16.34 Material Group 1.1 (A105 / A216 WCB / A350 LF2). Maximum allowable working pressure decreases with increasing temperature. For stainless steel bodies (Group 2.1), pressure-temperature ratings differ.

6. Performance Data

7. Key Design Features

• Trunnion mounted ball – Ball is supported by upper and lower stem bearings; line pressure forces are absorbed by the trunnion bearings, ensuring low operating torque and stable sealing performance, especially for large bore and high pressure applications.
• 3-piece side entry body – Bolted 3-piece construction allows inline maintenance without removing the valve from the pipeline.
• Double block & bleed (DBB) – Upstream and downstream independent seat sealing provides bi-directional shut-off with zero leakage; installation is non-directional.
• Spring-energized seats – Pre-loaded springs maintain seat-to-ball contact even at low pressure, ensuring reliable sealing.
• Automatic cavity pressure relief – When the valve is in the fully open or fully closed position, excess pressure trapped in the body cavity can be relieved by seat retraction, protecting the valve.
• Fire safe design (optional) – If the non-metallic seat is softened or destroyed by fire, the metal sealing surface of the seat support ring contacts the ball to provide secondary metal-to-metal sealing, compliant with API 607 or API 6FA. (API 607 6th Edition now covers the scope formerly addressed by API 6FA.)
• Blow-out proof stem – Stem is designed with anti-blowout retention, ensuring it cannot be accidentally ejected under pressure.
• Anti-static device – A spring-loaded anti-static device provides electrical continuity between the ball, stem, and body, preventing static charge accumulation.
• Emergency sealant injection – Sealant injection fittings are provided on the stem and seat areas; sealant can be injected to temporarily stop leakage in an emergency.
• Full bore design – The valve bore matches the pipeline internal diameter, allowing pipeline pigging with minimal flow resistance.

8. خيارات التشغيل

9. Ordering Information

Please provide the following when ordering:

1. Valve size (20″), pressure rating (Class 600)
2. Body material (A105 / A350 LF2 / F316) and NACE MR0175 requirement
3. Seat material (RPTFE / PEEK / metal seated)
4. Flange standard and facing (RF / RTJ)
5. Media name, temperature, and pressure
6. Actuation type (gear operator / electric / pneumatic)
7. Special requirements (fire-safe API 607, anti-static, low emission packing ISO 15848, etc.)
8. Third-party inspection requirement (BV, DNV, TÜV, etc.)

ضمان:

تلتزم شركة سافي فالفز بتقديم منتجات عالية الجودة وخدمة ما بعد البيع مريحة. نضمن لصماماتنا عمر خدمة لا يقل عن ١٢ شهرًا، نوفر خلالها جميع قطع الغيار اللازمة وتعليمات الصيانة المفصلة مجانًا. خلال فترة الضمان، في حال حدوث أي ضرر غير بشري، نستبدل المكونات مجانًا ونقدم دعمًا فنيًا احترافيًا. بعد انتهاء الضمان، يدفع العميل فقط تكلفة قطع الغيار، مع الاستفادة من خدمات الصيانة المخفضة. هدفنا هو مساعدة عملائنا على خفض تكاليف التشغيل وتحسين كفاءة الإنتاج من خلال جودة موثوقة ودعم شامل لما بعد البيع. سواءً للاستفسارات الفنية أو احتياجات الصيانة، سيستجيب فريق خبرائنا على الفور لضمان الحفاظ على الأداء الأمثل لنظام صماماتك في جميع الأوقات.