CF3M Wafer Dual Plate Check Valve

Pressure Rating PN16 (Equivalent to Class 150)
Nominal Size DN50 – DN600 (NPS 2″ – 24″) Specify as required
End Connection Wafer Type / Lug Type Select as required
Face to Face Dimension API 594 / EN 558 Series 20
Sealing Type Metal-to-Metal Hard Seal

Neem contact met ons op

Dual Plate Wafer Check Valve Technical Data Sheet

General Specifications

Item	Specificatie
Kleptype	Wafer Dual Plate Check Valve
Drukclassificatie	PN16 (Equivalent to Class 150)
Nominale grootte	DN50 – DN600 (NPS 2″ – 24″) Specify as required
End Connection	Wafer Type / Lug Type Select as required
Face to Face Dimension	API 594 / EN 558 Series 20
Sealing Type	Metal-to-Metal Hard Seal
Medium	Water, Oil, Gas, and Corrosive Media (Compatible with CF3M)
Operating Temperature	-29°C to +425°C (-20°F to +800°F)
Lichaamsmateriaal	ASTM A351 Grade CF3M (Equivalent to 316L Stainless Steel)
Disc (Plate) Material	ASTM A351 Grade CF3M (Equivalent to 316L Stainless Steel)
Shaft / Hinge Pin Material	ASTM A276 Type 316 / 316L Stainless Steel
Seat / Sealing Surface	Hard Facing (Stellite / Cobalt-based Alloy) on Body

Bill of Materials (ASTM Standards)

Part Name	Materiaal	Material Grade / Specification	ASTM Standard
Lichaam	Austenitic Stainless Steel	CF3M	ASTM A351
Discs (Dual Plate)	Austenitic Stainless Steel	CF3M	ASTM A351
Shaft / Hinge Pin	Precipitation Hardening / SS	17-4PH / 316 SS	ASTM A564 / A276
Seat Ring (Integral)	Hardfaced Alloy	Stellite (or equivalent)	–
Spring (Torsion)	High-Temperature Alloy	Inconel X-750 / 17-7PH	ASTM A638 / A693
Locating Dowel Pin	Stainless Steel	Type 316	ASTM F593
Gasket / O-Ring (Opt.)	Flexible Graphite / Viton	–	–

Technical Parameters & Performance

Item	Unit	Value / Description
Pressure Testing		API 598 / ASME B16.34
– Shell Hydrostatic Test	psi (MPa)	1.5 x PN (Appx. 348 psi / 2.4 MPa)
– High Pressure Seat Test	psi (MPa)	1.1 x PN (Appx. 255 psi / 1.76 MPa)
– Low Pressure Pneumatic Test	psi (MPa)	80 psi (0.6 MPa)
Operational Limits
– Max. Flow Velocity	ft/s (m/s)	Water: ≤ 16 ft/s (5 m/s); Gas: ≤ 164 ft/s (50 m/s)
– Closure Pressure		Backpressure prevents reverse flow. (Seat Leakage: Per API 598 / ISO 5208 Rate D for Metal Seats)
Disc Action		Spring-assisted automatic closure. Recommended installation on horizontal lines with shaft vertical, or vertical lines with upward flow.

Dimensions & Connection Data (Wafer Type, Units: mm / inches)

Note: Dimensions are for reference. Please refer to the specific manufacturer’s drawing for exact fit.

Size DN (NPS)	Valve Length L (mm)	Flange Dia. D (mm)	Bolt Circle K (mm)	Recommended Bolts	Approx. Weight (kg)
50 (2″)	43	165	125	4 x M16	~2.5
80 (3″)	64	200	160	8 x M16	~5.0
100 (4″)	64	220	180	8 x M16	~7.5
150 (6″)	76	285	240	8 x M20	~14.0
200 (8″)	95	340	295	12 x M20	~25.0
250 (10″)	114	405	355	12 x M24	~38.0
300 (12″)	114	460	410	12 x M24	~55.0
350 (14″)	127	520	470	16 x M24	~75.0
400 (16″)	140	580	525	16 x M27	~95.0

Applicable Standards

Design & Manufacture: API 594, ASME B16.34
Persoonlijk: API 594, ISO 5752 Series 20
Flange Dimensions: ASME B16.5 (for Class 150), ASME B16.47
Pressure Testing: API 598, ISO 5208
Material (Body/Disc): ASTM A351 Grade CF3M
Material (Other): ASTM A276, ASTM A564, etc.
Marking: MSS SP-25

Remarks

Material Characteristics: ASTM A351 CF3M is the cast equivalent of UNS S31603 (316L) . It features ultra-low carbon content, providing excellent resistance to intergranular corrosion after welding and in chloride environments.
Metal Seated Feature: This valve features a Metal-to-Metal Hard Seal, making it suitable for high-temperature applications. The allowable leakage rate typically conforms to ISO 5208 Rate D(or API 598) for metal seats (a minute leakage is permissible; zero leakage is generally not guaranteed for standard metal seats).
Flow Direction: A permanent flow directional arrow is cast or marked on the valve body. Installation must align with the pipeline flow direction.
Installation Guidance: Best installed in horizontal pipelines with the shaft in a vertical position. For vertical installations, flow must be in the upward direction to allow the discs to open properly.

GARANTIE:

SAVVY VALVES streeft naar uitzonderlijke productkwaliteit en zorgeloze aftersalesservice. Onze kleppen hebben een gegarandeerde minimale levensduur van 12 maanden. Gedurende deze periode leveren wij alle benodigde reserveonderdelen en gedetailleerde onderhoudsinstructies gratis. Mocht er binnen de garantieperiode schade ontstaan die niet door mensen is veroorzaakt, dan vervangen wij kosteloos de onderdelen en bieden wij professionele technische ondersteuning. Na de garantieperiode hoeven klanten alleen de kosten van de reserveonderdelen te betalen en profiteren zij nog steeds van kortingen op onderhoudsdiensten. Ons doel is om klanten te helpen de operationele kosten te verlagen en de productie-efficiëntie te verbeteren door middel van betrouwbare kwaliteit en uitgebreide aftersalesservice. Of het nu gaat om technische vragen of onderhoudsbehoeften, ons deskundige team reageert snel om ervoor te zorgen dat uw klepsysteem te allen tijde optimaal blijft presteren.

HOT SALE PRODUCTEN

Al meer dan 10 jaar zijn wij een toonaangevende leverancier van industriële kleppen voor grote wereldwijde projecten op het gebied van watervoorziening, olie & gas en ontzilting.

Nieuws

Laatste nieuws

Dutch